Tactical Rescue

8 Link
CMC

201202

8 Link

Regular price $29.00
/
Shipping calculated at checkout.

A key component of a rappel technique developed by our Tactical Rappel Class instructors, our 8 Link allows you to extend your Figure 8 descender further away from your harness to make room for a back-up Prusik hitch below the descender.

  • Quickly attaches to the Figure 8 using a girth hitch
  • Multiple carabiner slots allow proper length adjustment
  • Pocket stitching breaks at 5 kN (1,100 lbf)
  • MBS: 16.9 kN (3,800 lbf)

(Rappel 8 descender not included)

About CMC Web Gear

CMC sewn web products reflect many years of manufacturing experience and designs based on field use, rescues and testing. Lightweight yet durable, our tubular web delivers a high strength-to-weight ratio. Each product is sewn in our own California manufacturing facility with contrasting color thread for ease of inspection. We build CMC Web Gear as if we were going to use it ourselves – and we do.

Specs

ITEM # 201202
PRODUCT WEIGHT 54 G (1.9 OZ)
LENGTH 46 CM (18 IN)
COLOR BLACK
MBS 16.9 KN (3,800 LBF)
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Alta Flex Industrial Elbow Pads
Alta Flex Industrial Elbow Pads
Alta Flex Industrial Elbow Pads
Alta Flex Industrial Elbow Pads
Alta Flex

355310

Alta Flex Industrial Elbow Pads

Regular price $23.00
/
Shipping calculated at checkout.

Designed to protect your elbows when crawling and valuable for horizontal confined space entries, cave rescue, or tactical responses, Alta Flex Industrial Elbow Pads have non-slip, rubber caps that actually grip the surface, allowing faster movement. Two elastic straps with AltaGrip™ Hook & Loop Fastening System ensure a proper fit.

Specs

ITEM # 355310
PRODUCT WEIGHT 6.7 OZ (190 G)
COLOR BLACK
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Alta Superflex Knee Pads
Alta Superflex Knee Pads
Alta Superflex Knee Pads
Alta Superflex Knee Pads
Alta Flex

355413

Alta Superflex Knee Pads

Regular price $36.00
/
Shipping calculated at checkout.

Because emergency workers spend an inordinate amount of time working on their knees—this is particularly true of heavy rescue operations, confined space entries, or tactical responses— Alta Superflex Knee Pads are a must-have. Lightweight but with a full 1/2 inch of foam padding, they reduce stress and fatigue to the knees, allowing you to work longer and more effectively. The rubber caps grip the surface to prevent sliding, and a unique, easy-to-use buckle fastening system allows a comfortable fit that minimizes interference with circulation to the lower legs.

Specs

ITEM # 355413
PRODUCT WEIGHT 13.6 OZ (386 G)
COLOR BLACK
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
Aluminum Oval Carabiner
CMC

300081

Aluminum Oval Carabiner

Regular price $20.00
/
Shipping calculated at checkout.

Non-locking carabiners can be used for racking equipment or as the keeper carabiner on a load-release strap or mariners hitch. Non-locking carabiners should always be used in pairs, rigged opposite and opposed. Our oval aluminum carabiner features a unique key-lock design for snag-free operation and a side-swing gate for maximum gate opening. The oval design places equal amounts of force on the spine and gate, allowing the carabiner to maintain full rated strength regardless of the width of the web or rope clipped into it. Its also a good size to clip over the ropes coming out of a pulley to help mind a Prusik hitch.
Every carabiner is proof loaded.

Specs

  • Oval - 30008X
  • Major Axis - 22 kn
  • Minor Axis - 10 kn
  • Major Axis, Gate Open - 6 kn
  • Product Weight: 2.3 OZ (65 G)
  • Gate Opening: 1 IN (25 MM)
  • Interior Length: 3.5 IN (89 MM)
  • MBS: 22 KN (4,946 LBF)
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
CMC

201024

Anchor Strap

Regular price $66.00
/
Shipping calculated at checkout.

Anchor straps have a tough job, and see a lot of wear and tear. Over the years, weve learned that cuts and abrasion are the greatest threats to their safety and service life. To dramatically increase both, our Anchor Straps now feature two layers of the same durable mil-spec, resin-coated nylon web. Sewn by our highly skilled workers who make our rescue harnesses, our Anchor Straps feature forged steel D-rings individually proof loaded and sized for easy choker (girth-hitch) configuration when desired. Sewn-on web keeper allows for improved organization when stowed. Use our sized Anchor Strap Sleeves for added edge and abrasion protection.

Note: We recommend using a Delta Quick Link connector (part #382121) to prevent possible tri-axial loading of a carabiner when used in a basket configuration.

Specs

Strength Specifications for All Sizes: 
Basket (U) Configuration:85 kN (19,108 lbf)
End-to-End Configuration: 46 kN (10,341 lbf)
Choker Configuration: 48 kN (10,790 lbf)

  • Basket (U) Configuration:85 kN (19,108 lbf)
  • End-to-End Configuration: 46 kN (10,341 lbf)
  • Choker Configuration: 48 kN (10,790 lbf)
  • Color Blue
  • NFPA Rating General Use
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Anchor Strap Sleeve
CMC

294032

Anchor Strap Sleeve

Regular price $38.00
/
Shipping calculated at checkout.

Made from tough #4 duck canvas and a layer of vinyl coated polyester, our Anchor Strap Sleeves protect anchor straps from the elements and surface abrasion, reducing wear and tear and increasing safety and service life. Available sizes: S-XL.

Anchor Strap not included.

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
Arizona Vortex Bag System
CMC

727115

Arizona Vortex Bag System

Regular price $135.00
/
Shipping calculated at checkout.

Designed for ultimate accessibility and quick access, our new Arizona Vortex Bag System is extremely rugged and able to be carried on the back into the wilderness or in an industrial environment. Made of durable Cordura® nylon, they feature extra protection in high-wear places for exceptional longevity.

The head backpack features end-to-end-zippers for full-length flat opening. One side securely cradles the two head components in custom pockets with protective padding and stows the pin set bag attached by a quick-release strap. The opposite side holds both the 40-foot 8mm tether cord and (3) AZ Hobble Straps and has a molle strip for attaching additional gear.

Padded shoulder and sternum straps can be stowed internally, so that the backpack can be carried gear-bag style with the comfortable side-grip carry handle. The back pad features breathable D3 cloth.

The front panel has an external zipper pocket for the AZ Vortex User’s Manual or other items, and an additional internal pocket for holding pulleys, carabiners and hardware. (AZ Vortex components, pulleys and carabiners sold separately.)

The three leg bags feature hand carry handles and an adjustable padded shoulder sling for easy transport. End-to-end zippers for full-length opening either direction provide easy access, and the oversize bags can carry additional leg components. Two internal padded dividers allow for separated protection of the legs. Compression straps around the girth of the bag cinch tight to keep gear snugly in place.

Each of the two newly designed padded foot sleeves nest inside the leg bags and fasten securely to hold three foot components, either flat or raptor style. This facilitates a quick change of feet, so that carrying both sets is not necessary.

The AZV Bag System ships with the Arizona Vortex or may be purchased as a set to upgrade or replace existing bag sets. Sold as a system.

Sedona Shoulder Harness (sold separately)
A new removable backpack carrying system for Arizona Vortex leg bags, the Sedona Shoulder Harness quickly attaches or detaches from the leg bag for extended carries up flights of stairs or in the backcountry. The harness is constructed of high-strength Cordura®nylon with comfortable padded shoulder straps, sternum strap, back panel and waist belt, each lined with breathable cloth. Order one shoulder harness for each leg bag (3) in the set.

Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. The Arizona Vortex Bag System can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards it falls under. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Specs

ITEM # 727200
PRODUCT WEIGHT 18 LB (8.2 KG)
COLOR BLUE, BLACK, GREY
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Arizona Vortex Head Set Pulley Wheel
CMC

727090

Arizona Vortex Head Set Pulley Wheel

Regular price $49.00
/
Shipping calculated at checkout.

Replacement Head Set Pulley Wheel for Arizona Vortex.
(Pin not included)

Specs

ITEM # 727090
PRODUCT WEIGHT 2.2 OZ (62 G)
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
Arizona Vortex Kit
CMC

727300

Arizona Vortex Kit

Regular price $4,995.00
/
Shipping calculated at checkout.
 

42 Business Days

So named from its development in the rugged Red Rock highlands of northern Arizona, the Arizona Vortex (AZV) multipod was created from years of trial and error. Having worked with crude but functional lashed timber frames at Sedona-based Ropes That Rescue, Reed Thorne developed the AZV with the help of Rock Thompson at Rock Exotica. The Arizona Vortex represents the essence of at-the-edge frames, which no standard multipod can match today.

The father of all portable artificial high directionals (AHD)s, the AZV is a tripod, bipod and monopod in one all-inclusive kit. Its precision machined two-piece head can be rigged as a standard tripod or, in advanced applications, as an A-frame, Sideways A-frame, Gin Pole or a multitude of other configurations. The tripod can be formed into an Easel A-frame with adjustable leg lengths. The versatile third leg allows rescuers to set up an artificial high directional in virtually any urban, industrial or wilderness application. On A-frame and Easel A-Frame applications, pulleys can be attached using provided quick-pins directly into the Head Set without using carabiners, eliminating valuable lost headspace and working clearance. The AZV is ideal for use with high lines and tracking line offsets. The extra attachment points also work well for rope access where several lines may be needed over the edge. Both the Raptor and Flat feet sets are included to provide secure footing options on varying terrain and industrial surfaces.

Also Included

Arizona Vortex Bag System: Designed for ultimate accessibility and quick access, our backpack-style bags are extremely rugged and able to be carried on the back into the wilderness or an industrial environment such as stairwells. Made of durable Cordura® nylon, they feature extra protection in high-wear places for exceptional longevity. Sold as a set.

(21) Hi-viz orange Pin Flags can be attached to quick pins to help increase visibility and prevent pins from rolling on slope. Also included is a 12m (40-ft) length of 8mm orange accessory cord for safety tethering the AZV, and (3) Hobble Straps for independently securing the legs.

The Arizona Vortex Kit comes complete with:

  • Head Set (2 pieces)
  • Head Set Pulley Wheel
  • Head Set Pins (4)
  • Head Set Backpack
  • Inner Legs (3)
  • Outer Legs (7)
  • Leg/Foot Pins (17)
  • Leg Bags w/ Shoulder Straps (3)
  • Flat (Omni) Feet (3)
  • Raptor (Claw) Feet (3)
  • Foot Storage Sleeves (2)
  • Pin Bag, Orange
  • Pin Flags, Hi-Viz Orange (21)
  • Hobble Straps, Adjustable (3)
  • Safety Tether Cord – 8mm cord, 12m (40 ft) length
  • User’s Manual

Specs

  • Min Height: 2.7 m (9 ft)
  • Max Height (with additional legs): 3.7 m (12 ft)
  • Weight (with both foot sets): 33 kg (72 lb)
  • Shipping Weight (including all parts, bags and packaging): 43 kg (95 lb)
  • MBS: 36 kN (8,093 lbf)
  • Certification: Classified to NFPA 1983 (2017 ED) – General Use

*Sedona Shoulder Harness sold separately.One needed per leg bag.

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
ATOM Access Harness
CMC

202222

ATOM Access Harness

Regular price $529.00
/
Shipping calculated at checkout.

A rope access workhorse thats as durable as it is comfortable.

The ATOM Series, our most comfortable harness line ever, is the culmination of stripping harness design down to the basics and re-imagining a performance-enhancing tool for rescue and rope access. CMC has incorporated years of feedback from experts who spend long hours in a harness. In addition, the ATOM harness went through rigorous field-testing, resulting in a harness design that improves safety, comfort and workflow efficiency in all the ways you cant see, but feel.

Every detail in the ATOM Access Harness has been thoughtfully designed for the rope access professional. From the structure and attachment points to buckles, gear and accessory loops and other features, the ATOM delivers maximum comfort, workflow efficiency and durability in a lightweight and low-profile harness system.

Specs

  • Improved architecture molds to the user for a lightweight, low-profile fit.
  • Ergonomic design for maximum comfort and support:
  • Padding constructed from dual density foam, laminated to optimize load distribution and apply the right amount of support only where needed.
  • Waist and leg pads are constructed with rolled edges to provide additional comfort.
  • Y-back construction and bridged front lift:
  • Allows for optimal adjustment at each shoulder.
  • Provides a secure fit while minimizing pressure from the harness at the neck.
  • Constructed with polyester webbing:
  • Keeps a supple hand for comfort and easy buckle adjustment.
  • Water repellent and UV resistant material for lasting strength and durability in extreme weather conditions.
  • Multiple accessory attachment points provide ample space for stowing and organizing hardware and tools.
  • Gear loop over-braid is based on a 32-carrier polyester, rope sheath design that delivers a familiar texture and functional robustness.
  • UL Certified to relevant ANSI Z359.11, CSA and NFPA 1983 (2017 ED) standards.
  • Made in the USA of domestic and foreign components.

Core Features

  • Large ID aluminum D-rings at the waist, sternal and dorsal attachment points keep the harness lightweight, yet allows room for multiple carabiners.
  • Steel adjuster buckles are low profile and allow for maximum and efficient adjustment.
  • Aluminum side D-rings provide lightweight work positioning attachment points.
  • Chest Ascender HC by Climbing Technology
  • Hard coat anodization resists wear
  • Unique integrated design centers unit for efficient rope ascent and enables replacement.
  • Molded gear loops with high impact, cold resistant, polypropylene core provide easy gear stowage and retrieval.
  • Four Tool Loops: Two at the rear waist and one at each leg pad for additional gear stowage.
  • Workseat attachment points located at the waist to connect the CMC Skysaddle.
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
ATOM Chest Harness
CMC

202363

ATOM Chest Harness

Regular price $169.00
/
Shipping calculated at checkout.

The ATOM Chest Harness provides exceptional comfort and versatility for high angle rescues. The ATOM Chest transforms the ATOM Sit Harness or Build Your Own (BYO) ATOM Sit Harness into a full body NFPA Class III Life Safety Harness. This modular unit is quickly and easily assembled for team members who transition from working on the edge to working on the rope. It allows rescuers to utilize the mobility of a sit harness until the comfort and versatility of a full body harness is desired. Use the ATOM Chest when the job calls for hanging on the rope, managing heavy loads, and operating complex rope systems. Compatible with CMC’s Chest Ascender Kit and built with multiple steel attachment points, the ATOM Chest delivers safety, comfort, and next-level versatility for the rope technician.

Features:

  • Transforms ATOM Sit or Build Your Own (BYO) ATOM Sit into a NFPA Class III Life Safety Harness.
  • Allows teams to utilize the mobility of a sit harness until a full body unit is preferred for working on rope.
  • Sternal and dorsal steel D-rings provide robust, low-profile attachment points that can fit multiple carabiners.
  • Integrated load transfer from chest attachment points to the Sit Harness, increasing comfort in a vertical lift.
  • Compatible with a variety of chest ascenders that can be added or swapped using the ATOM Chest Ascender Kit.
  • Built for all-day comfort and security, while being quick to install or remove to meet the demands of the job.
  • Constructed using water-repellant, UV resistant webbing, as well as breathable D3 cloth in the dorsal padding.
  • Available in black with contrasting thread for wear inspection and Black Web Keepers™ to secure loose ends.
  • Replaces the ProSeries Chest Harness and adds another level of customization to the ATOM Harness Series.

Compatibility:

  • The current ATOM Sit and BYO ATOM Sit (PN# 202B) has a rear oval ring for attaching the ATOM Chest. This combination creates an NFPA Class III Life Safety Harness without the need for additional hardware.
  • The previous ATOM Sit (PN# 202A) has a soft loop on the back. A Trapezium Quick-Link is required to attach the rear tether of the ATOM Chest to the ATOM Sit. This combination is not NFPA Class III, but the ATOM Sit retains its NFPA Class II designation.

Assembly:

To combine the ATOM Chest with the ATOM Sit or BYO ATOM Sit, follow these steps and refer to the Pro Tip Video.

1) Remove the dorsal webbing from the slider buckle.

2) Feed the dorsal strap through the oval ring (202B) or Trapezium Quick-Link (202A) on the back of the ATOM Sit.

3) Re-attach the dorsal strap to the slider buckle of the ATOM Chest.

4) Feed the trap link through the center loop on the ATOM sit. Make sure it feeds through all of the webbing layers.

5) Tighten the trap link using a 15mm wrench.

Ascenders:

To install or swap out a variety of chest ascenders, follow these steps and refer to the Pro Tip Video.

1) Open the trap link on the ATOM Chest and remove the front lift.

2) Run the chest ascender strap loop over the front lift of the ATOM Chest.

3) Push the stiffened end of the chest ascender strap through the top hole of the chest ascender and over the back of the front lift.

4) Push the stiffened end under the top strap, over and back under the bottom strap, and under the chest ascender strap loop itself.

5) Reconnect the front lift to the trap link and tighten with a 15mm wrench.

6) Use the delta link to connect the chest ascender to the atom Sit ventral webbing attachment point.

7) Confirm the delta link is positioned in front of the ATOM Chest trap link, running through the same webbing loops.

8) Tighten the delta link with a 14mm wrench. Both the delta and trap link should be secured a quarter turn beyond hand tightness.

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    ATOM Sit Harness
    ATOM Sit Harness
    ATOM Sit Harness
    ATOM Sit Harness
    ATOM Sit Harness
    ATOM Sit Harness
    ATOM Sit Harness
    ATOM Sit Harness
    CMC

    202324

    ATOM Sit Harness

    Regular price $368.00
    /
    Shipping calculated at checkout.

    NEW!
    Maximum comfort and support in a lightweight sit harness allows you to work freely and efficiently.

    The ATOM Series, our most comfortable harness line ever, is the culmination of stripping harness design down to the basics and re-imagining a performance-enhancing tool for rescue and rope access. CMC has incorporated years of feedback from experts who spend long hours in a harness. In addition, the ATOM harness went through rigorous field-testing, resulting in a harness design that improves safety, comfort and workflow efficiency in all the ways you cant see, but feel.

    Every detail in the ATOM Sit Harness has been thoughtfully designed for the rescue or rope access professional. From the structure and attachment points to buckles, gear and accessory loops and other features, the ATOM delivers maximum comfort, safety and workflow efficiency in a lightweight and low profile harness system.

    Specs

    • Improved architecture molds to the user for a lightweight, low-profile fit.
    • Ergonomic design for maximum comfort and support:
    • Padding constructed from dual density foam, laminated to optimize load distribution and apply the right amount of support only where needed.
    • Waist and leg pads are constructed with rolled edges to provide additional comfort.
    • Constructed with polyester webbing:
    • Keeps a supple hand for comfort and easy buckle adjustment.
    • Water repellent and UV resistant material for lasting strength and durability in extreme weather conditions.
    • Gear loop over-braid is based on a 32-carrier polyester, rope sheath design that delivers a familiar texture and functional robustness.
    • Multiple accessory attachment points provide ample space for stowing and organizing hardware and tools.
    • UL Certified to NFPA 1983 (2017 ED).
    • Made in the USA of domestic and foreign components.

    Core Features

    • Black webbing for low visibility.
    • Steel D-ring at the waist offers a robust and low profile connection point.
    • Soft Side Attachments provide work positioning while keeping the unit lightweight and low profile.
    • Cobra Quick-Connect Buckles at the legs make donning quick and efficient.
    • Molded gear loops with high impact, cold resistant, polypropylene core provide easy gear stowage and retrieval.
    • Workseat attachment points located at the waist to connect the CMC Skysaddle.
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    AZ Bound-Loop Prusiks
    AZ Bound-Loop Prusiks
    AZ Bound-Loop Prusiks
    AZ Bound-Loop Prusiks
    AZ Bound-Loop Prusiks
    AZ Bound-Loop Prusiks
    AZ Bound-Loop Prusiks
    AZ Bound-Loop Prusiks
    CMC

    293383

    AZ Bound-Loop Prusiks

    Regular price $20.00
    /
    Shipping calculated at checkout.

    Years of development, testing and fine tuning has made our Prusik cord a preferred choice by rescue schools, agencies and rescuers alike. Our sewn Prusiks offer unmatched performancewith strength equivalent to a tied Prusik loop, just without the cumbersome knot. The factory-sewn SecureStitchTM is covered with durable clear shrink tubing that allows regular inspection and helps protect the stitching for longer life. Some rescuers prefer a bound-loop style Prusik for cinching the attachment bight around the carabiner to help snug the Prusik to the connector. Our AZ Bound-Loop Prusiks are identical to our Sewn Loop Prusiks except that the shrink tube captures both sides of the loop while allowing adjustment.

    Specs

    • Diameter: 8MM
    • MBS: 20KN (4,496 LBF)
    Color: Red
    Item: 293383
    Product Weight: 1.7 oz (48 g)
    Size: Short
    Length: 18 in (46 cm)
    Diameter: 8 mm
    MBS: 20 kN (4,496 lbf)

    Color: Green
    Item: 293386
    Product Weight: 2.2 oz (62 g)
    Size: Long
    Length: 25 in (63.5 cm)
    Diameter: 8 mm
    MBS: 20 kN (4,496 lbf)
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    AZTEK Bound-Loop Prusiks and Purcells
    CMC

    295001

    AZTEK Bound-Loop Prusiks and Purcells

    Regular price $16.00
    /
    Shipping calculated at checkout.

    Years of development, testing and fine tuning has made our sewn Prusiks, Purcells and cord a preferred choice by rescue schools, agencies and rescuers everywhere. Our 100% nylon sewn products offer unmatched performancewith strength equivalent to a tied Prusik loop, just without the cumbersome knot. Our factory-sewn SecureStitch is covered with durable clear shrink tubing that allows for regular inspection and helps protect the stitching for longer life. These bound-loop Prusiks and Purcell were designed specifically for use with our AZTEK ProSeries System.

    Specs

    MBS: 13 KN (2,922 LBF)

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC Lifeline
    CMC

    272450

    CMC Lifeline

    Regular price $1.11
    /
    Shipping calculated at checkout.

    All CMC Lifeline is sold by the foot.

    Featuring the optimum balance of strength, handling, and durability with minimum sheath slippage, this 100% nylon kernmantle rescue rope offers excellent knotability and provides a high level of control when used with a descent control device. The industry standard for those who prefer traditional nylon ropes, CMC Lifeline is a great choice whether you are a firefighter on a high-rise, performing a high-angle mountain rescue, responding to an industrial accident, or a tactical officer on rappel.

    Rope is sold by the foot. Rope ends are included.

    Specs

    • The following specifications apply to all diameters of CMC Lifeline:
    • Certification UL Classified to NFPA 1983 Standard on Life Safety Rope and Equipment for Emergency Services, 2017 Edition.
    • Construction Block creel, static kernmantle.
    • Fiber 100% nylon.
    • Sheath 32-strand braided, with half the strands having a left (Z) twist and the other half having a right (S) twist for a balanced, torque-free rope with maximum abrasion resistance.
    • Rating NFPA General Use for 13 mm (1/2 in) and 15.5 mm (5/8 in); NFPA Technical Use for 9.5 mm (3/8 in) and 11 mm (7/16 in)
    • Temperature Melt point 460 F (238 C).
    • Made in the USA
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC/Roco Work-Rescue Harness
    CMC

    202672

    CMC/Roco Work-Rescue Harness

    Regular price $799.00
    /
    Shipping calculated at checkout.

    When time is of the essence, donning a harness shouldnt slow you down. Thanks to its innovative no-step design, the new CMC/Roco Work-Rescue Harness is extraordinarily fast and easy to don. Contrasting color distinctions on interior and exterior padding expedite the process.

    The unique design provides wraparound comfort and breathability, cradling the wearer with an ergonomically formed Jack Back and waist and leg pads that feature contoured and molded ventilation channels. The coat-style of the harness entry prevents possible contamination of the waist belt and leg loops from footwear, since there is no need to step through or over the harness to don or doff.

    Aluminum hardware helps to make this harness remarkably lightweight. Designed to not open when loaded, the aluminum ANSI-rated AustriAlpin Cobra quick-release buckle are fastto connect and disconnect.

    The Work-Rescue Harness offers the perfect balance of donning/doffing speed, lightweight materials, and overall comfort for rescuers, rope access technicians, tower climbers and other rope professionals working in the demanding vertical environment.

    Specs

    • Two ANSI Z359.11 certified lanyard parkingloops atchest
    • UL Classified to NFPA 1983 - Class III and ANSI Z359.11
    • Made in USA of domestic and foreign components
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    Cobra-D Uniform Rappel Belt
    CMC

    202400

    Cobra-D Uniform Rappel Belt

    Regular price $95.00
    /
    Shipping calculated at checkout.

    Designed for Emergency Rappel

    In a class by itself, CMC offers the only NFPA Certified Uniform Rappel Belt available. Designed for everyday wear but with the performance needed for an emergency rappel or belay. Standard uniform wear for fire fighters, search and rescue, and SWAT personnel, the belt is constructed to the same exacting standards as our harness line and is the only certified uniform belt available. The belt uses 1-3/4 web that fastens securely without requiring any hook-and-loop material. The AustriAlpin D-ring COBRA buckle is manufactured from 7075aluminum alloy and features a built-in stainless steel D-ring (Buckle:18 kN / 4,000 lbf MBS, D-ring: 22 kN / 5,000 lbf MBS, straight pull). The buckle requires a two finger release and will not open when loaded. Included web keeper secures excess web at tail end of belt. Adjustable, one size fits most.

    Note: This belt is not intended as a substitute for a harness.

    Specs

    • Product Weight 10 oz (294 g)
    • Waist Size 26 - 48 in (66 - 122 cm)
    • Color Coyote
    • NFPA Rating Escape Belt
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Disaster Response Litter
    CMC

    726300

    Disaster Response Litter

    Regular price $479.00
    /
    Shipping calculated at checkout.

    A medium-duty, economical litter designed for durability and versatility, featuring unique tubular runner rails that span the full length of the litter along the bottom. These provide a very strong, durable base, making it far more difficult to damage during regular use compared to other baskets that simply use a flat bar. A very cost-effective alternative to the more heavy-duty stainless steel models, this powder-coated steel litter with Durathene netting meets the needs of many users who only use litters occasionally, or who are on very limited budgets for rescue equipment. Our Disaster Response Litter comes in black with four litter straps. The narrower, confined space model fits through tight openings.

    Shipping Charges on Litters and Litter Wheels: This item is drop-shipped direct from the manufacturers warehouse. A $125 USD flat rate shipping fee applies per item shipped within the contiguous US. Please allow up to 4 weeks for delivery.

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Edge Guards
    CMC

    294030

    Edge Guards

    Regular price $40.00
    /
    Shipping calculated at checkout.

    Protect your rope with tough #4 duck canvas and a layer of vinyl coated polyester. Our Edge Guards close with a two-inch strip of hook-and-loop. A strong web loop lets you anchor the Edge Guard to keep it in place. (We do not use grommets as a moving rope can abrade a grommet enough to create a sharp edge.) Use an Edge Guard to protect anchor ropes and webbing as well as your rescue ropes.

    Specs

    • Medium
    • item # 294030
    • Product Weight 6.5 oz (184 g)
    • Length 18 in (46 cm)
    • Color Black
    • Large
    • item # 294029
    • Product Weight 8.5 oz (241 g)
    • Length 24 in (61 cm)
    • Color Black
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Edge Pad
    Edge Pad
    Edge Pad
    Edge Pad
    CMC

    294019

    Edge Pad

    Regular price $71.00
    /
    Shipping calculated at checkout.

    Our heavy-duty edge pad, made from rugged 24-oz #4 canvas protects ropes from abrasion and helps keep them clean, increasing their life. It also reduces the amount a rope digs into a soft edge, such as the berm of a road. Our improved design replaces metal grommets and uses strong integrated corner web loops that allow for anchoring in place when needed. The pads also feature a set of additional offset web loops, allowing overlap when joining two or more pads to extend coverage. Pads work well over most edges and also protects when wrapped around trees, rails and beams.

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    Heavy Rescue Organizer
    CMC

    770403

    Heavy Rescue Organizer

    Regular price $169.00
    /
    Shipping calculated at checkout.

    Our Heavy Rescue Organizer (HRO) is one-half of a two-part system designed to efficiently organize rope rescue equipment. Hardware is stored in the three large compartments of this zipper-pocketed saddle, which when strapped to a rope bag can be quickly removed when its time to deploy the rope. The clear rope log pocket on the top of the organizer can also be used to store small items. Two webbing loops are provided to hold a large supply of carabiners. Constructed of waterproof, heavy-duty CORDURA nylon, the organizer can be used with our #2 or #3 Rope Bag.

    *Price includes organizer only; rope bags are sold separately.

    Specs

    • Product Weight 1 lb 15 oz (879 g)
    • Volume 800 ci (13 L)
    • Pocket sizes: 19 x 5 x 4 in, 12 x 5 x 4 in, 5 x 5 x 4 in (48 x 13 x 10 cm, 30 x 13 x 10 cm, 13 x 13 x 10 cm). 
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Helitack Harness
    Helitack Harness
    Helitack Harness
    Helitack Harness
    Helitack Harness
    Helitack Harness
    Helitack Harness
    Helitack Harness
    Helitack Harness
    Helitack Harness
    CMC

    202922

    Helitack Harness

    Regular price $759.00
    /
    Shipping calculated at checkout.

    Designed for aircrews by aircrews, the full-body Helitack Harness brings operator comfort, safety and versatility to a new level. The sewn waist loop attachment point allows for multiple carabiner attachment as well as large hoist hooks without the risk of twisting or binding hardware. A rear D-ring provides a travel restraint attachment point when working inside the aircraft cabin. Sternal and dorsal attachment points provide additional hoisting/lifting points in order to facilitate specific mission requirements.

    The vest is made of high-visibility orange mesh and features reflective material on the back of each shoulder, allowing the wearer to be seen more easily in low light conditions, as well as aiding vertical referencing when suspended beneath the aircraft. Sewn web loops on the shoulders permit the attachment of a strobe light, knife or other accessories. Features Dual-Radio pockets for two hand-held radios or to store gloves, chemical light sticks or other adjuncts.

    The front features a built-in MOLLE Attachment System. Two 10-mm Delta Quick Links included.

    A Radio/HEED version that features a single radio pocket as well as a pocket for an emergency egress air bottle (not included), which is often desired when flying over water, is available by special order. A flotation collar may be added by special order.

    Specs

    • Product Weight 3.6 kg (8 lb)
    • Color Black / Orange
    • NFPA Rating Class III

    Waist Size:
    SM Waist Size 66 - 76 cm (26 - 30 in)
    MD Waist Size 76 - 112 cm (30 - 44 in)
    LG Waist Size 107 - 122 cm (42 - 48 in)

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart