Anchors

The 1″ Removable Concrete Anchor 10K is designed for use in 10-inch thick, cured concrete with a compression strength of at least 3000 p.s.i. This reusable concrete anchor is easy to install, just compress the string and insert the cable shaft into the hole. This anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for fall arrest, fall restraint, and as a work positioning device. The 1″ Removable Concrete Anchor fits holes of 1 inch in diameter, and has an ultimate breaking strength of 10,000 pounds.

Key Features: 

● Meets ANSI Z359.18-2017, ANSI A10.32-12 and CE-EN 795
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Size: 1″
● Weight: 0.9-lbs
● Used in concrete substrate only
● Breaking Strength: 10,000 lbf / 44kn
● Applications include: fall protection, restraint, work positioning

The 3/4″ Precast Concrete Toggle Lok Anchor 5K (Part #A6005) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage connector for fall protection. These precast concrete lifting anchors are easy to install, just compress its spring and insert the cable shaft into the hole, and can be inserted inside precast concrete and steel flanges. This concrete anchor is designed for use in 12-inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.

Key Features:

● Meets ANSI Z359.18-2017, ANSI A10.32-12 and CE-EN 795
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Size: 3/4”
● Weight: 0.45-lbs
● Breaking Strength: 5,000 lbf / 22kn

The 3/4″ Removable Concrete Anchor 5K (Part # A6002) is designed for use in 12-inch thick cured concrete with a compression strength of at least 3000 p.s.i. The concrete anchor is easy to install, just compress its spring and insert the cable shaft into the hole. This anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for fall arrest, restraint, and as a work positioning device. It has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 3/4″ reusable Concrete Anchor fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.

Key Features:

● Meets ANSI Z359.18-2017, ANSI A10.32-12 and CE-EN 795
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Size: 3/4″
● Weight: 0.4-lbs
● Used in concrete substrate only
● Can fit a 3/4” hole diameter, 3″ deep minimum
● Applications include: fall protection, restraint, work positioning

Rigging plater with 3 holes, 20mm diameter, designed to organize a tidy workplace and to create an easy system of multiple anchor points.

The upper hole allows to fit two carabiners at the same time.

Made of light aluminum alloy, very light, compact and durable.

New 10 mm thick version with beveled holes that allow textile items (rope, lanyards, straps) to be directly inserted without the need for connectors.

High quality product, made ​​in Italy!

The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest or fall restraint.

Key Features:

● Meets ANSI A10.32-12
● Compliant with OSHA 1910 and OSHA 1926 Subpart M
● Product Weight: 12.4 lbs.
● Easy to install
● Supports 1 worker in fall arrest, or 2 workers in restraint
● 4 connection points
● Min. Breaking Strength 5,000 lbs.
● Worker Capacity Range: 130-310 lbs.
● Material: Powder Coated Steel

Rigging plater with 4 holes, 20mm diameter, designed to organize a tidy workplace and to create an easy system of multiple anchor points.

The upper hole allows to fit two carabiners at the same time.

Made of light aluminum alloy, very light, compact and durable.

New 10 mm thick version with beveled holes that allow textile items (rope, lanyards, straps) to be directly inserted without the need for connectors.

High quality product, made ​​in Italy!

• Breaking Strength: 10,000 lbf / 44 kn
• Weight: 1.6 lbs (0.72 kg)
• Zinc Plated Steel, 5/8″
• Compliance: ANSI Z359.7 & CE-EN 795

The 5K Drop Through Anchor – 8.5′ is a 5,000 pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 8.9 lbs.
● Plate Dimensions: 12″ x 3/16″
● Breaking Strength: 5,000 lbf / 22kn
● Application: Concrete Floors, Steel Girders, Steel Grates

The 5K Drop Through Anchor – 8.5′ is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 2.7 lbs.
● Plate Dimensions: 6″ x 3/16″
● Breaking Strength: 5,000 lbf / 22kn
● Application: Concrete Floors, Steel Girders, Steel Grates

The 5K Drop Through Anchor – 8.5′ is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 1.8 lbs.
● Plate Dimensions: 4″ x 3/16″
● Breaking Strength: 5,000 lbf / 22kn
● Application: Concrete Floors, Steel Girders, Steel Grates

ClimbTech ANSI Z359 certified anchorage connector with iridescent blue tubing for easy cable inspections. Sling can be used in a basket configuration.

• Breaking Strength: 5,000 lbf / 22 kn
• Weight: 1.0 lbs (0.45 kg)
• Compliance: ANSI Z359

The 5K Wire Rope Sling is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3′ and 6′ lengths with various terminations for versatility on the job or in a rescue kit.

Key Features:
● Meets ANSI Z359.18-2017 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 1.3 lbs., .9 lbs.
● Breaking Strength: 5,000 lbf / 22kn
● Durable & easy to use
● Steel thimble eye
● Cable resists wear around sharp edges

The 5K Wire Rope Sling – 6ft is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3′ and 6′ lengths with various terminations for versatility on the job or in a rescue kit.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 1.3 lbs.,
● Breaking Strength: 5,000 lbf / 22kn
● Durable & easy to use
● Steel thimble eye
● Cable resists wear around sharp edges

The 7/8″ Precast Concrete Toggle Lok Anchor 5K (Part #A6004) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage connector for fall protection. These precast concrete lifting anchors are easy to install, just compress its spring and insert the cable shaft into the hole, and can be inserted inside precast concrete and steel flanges. This concrete anchor is designed for use in 12-inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.

Key Features:

● Meets ANSI Z359.1-2007, ANSI A10.32-12 and CE-EN 795
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Size: 7/8”
● Weight: 0.6-lbs
● Breaking Strength: 5,000 lbf / 22kn

A CMC original design that has withstood the test of time, our Anchor Plates keep the carabiners holding the different parts of your rescue system from jamming together. The hardware becomes easier to see, making safety checks more accurate. It can also keep you from clipping a carabiner into the wrong loop of the anchor web. For anchor systems, it makes an excellent collection point. We use the Anchor Plate in CMC Rope Rescue classes, which allows our students to set up systems faster with fewer mistakes. Hole diameters: small 7/8 in (22 mm), large 2 in (51 mm)

Twenty years ago CMC introduced the Anchor Plateas a strong, lightweight, and compact collection point for connecting a rescue system to an anchor. And that point is an important feature. Over the years weve seen a steady progression of bigger, better anchor and rigging plates with more and more holes entering the market. But the bigger the plate, the less like a collection point it becomes, increasing the potential for rotation of the plate, creating additional system extension and shock-loading if any movement or failure of an anchor occurs. In 20 years of use, weve not seen an operational need for more holes, a larger size, or more weight.

Product Tip:
Besides serving as the point of distribution to any number of secure anchor points, rigging plates also serve the benefit of aligning the separate lines of a rigging system in distinct order, keeping multiple and various lines orderly. One tip when determining complementary gear to use with rigging plates; consider the versatility swivel pulleys can lend to the rigging system. They introduce rotational movement into the rigging lines running from the plate because the swivel pulley can rotate as needed to provide enhanced inline ability to clear other components within the system.

Specs

• Aluminum
• Item: 300610
• Weight: 7.2 OZ (204 G)
• Color: Red
• NFPA Rating: General
• 3 Sigma MBS: 45 KN (10,116 LBF)

• Stainless Steel
• Item: 300615
• Weight: 9.8 OZ (278 G)
• Color: Stainless
• NFPA Rating: General
• 3 Sigma MBS: 43 KN (9,666 LBF)Anchor Plate

This is the Brite clear anodized, Inner Leg to the AZV system sold separately as a replacement item. The AZV Kit comes equipped with three Inner Legs (and seven Outer Legs). The Arizona Vortex is known as the father of all portable artificial high directional systems (AHD) with the versatility to be configured and utilized as a tripod, bipod and monopod when purchased as the all-inclusive kit. Raptor Feet and Flat Feet are not included with the Inner Leg.

Specs

This is the anodized Outer Leg to the AZV system sold separately as a replacement item. The AZV Kit comes equipped with seven Outer Legs (and three Inner Legs). The Arizona Vortex is known as the father of all portable artificial high directional systems (AHD) with the versatility to be configured and utilized as a tripod, bipod and monopod when purchased as the all-inclusive kit. The Raptor Foot and Flat Foot are not included with the Outer Leg.

Specs