Anchor Devices

3/4″ Removable Concrete Anchor 5K
Malta Dynamics

A6002

3/4″ Removable Concrete Anchor 5K

Regular price $109.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The 3/4″ Removable Concrete Anchor 5K (Part # A6002) is designed for use in 12-inch thick cured concrete with a compression strength of at least 3000 p.s.i. The concrete anchor is easy to install, just compress its spring and insert the cable shaft into the hole. This anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for fall arrest, restraint, and as a work positioning device. It has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 3/4″ reusable Concrete Anchor fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.

Key Features:

● Meets ANSI Z359.18-2017, ANSI A10.32-12 and CE-EN 795
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Size: 3/4″
● Weight: 0.4-lbs
● Used in concrete substrate only
● Can fit a 3/4” hole diameter, 3″ deep minimum
● Applications include: fall protection, restraint, work positioning

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
4-Way Anchor Plate
4-Way Anchor Plate
4-Way Anchor Plate
4-Way Anchor Plate
Malta Dynamics

A6304

4-Way Anchor Plate

Regular price $129.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest or fall restraint.

Key Features:

● Meets ANSI A10.32-12
● Compliant with OSHA 1910 and OSHA 1926 Subpart M
● Product Weight: 12.4 lbs.
● Easy to install
● Supports 1 worker in fall arrest, or 2 workers in restraint
● 4 connection points
● Min. Breaking Strength 5,000 lbs.
● Worker Capacity Range: 130-310 lbs.
● Material: Powder Coated Steel

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
5K Drop Through Anchor – 8.5′ W/12″ Round Plate
Malta Dynamics

A6202

5K Drop Through Anchor – 8.5′ W/12″ Round Plate

Regular price $149.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The 5K Drop Through Anchor – 8.5′ is a 5,000 pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 8.9 lbs.
● Plate Dimensions: 12″ x 3/16″
● Breaking Strength: 5,000 lbf / 22kn
● Application: Concrete Floors, Steel Girders, Steel Grates

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
5K Drop Through Anchor – 8.5′ W/6″ Round Plate
5K Drop Through Anchor – 8.5′ W/6″ Round Plate
5K Drop Through Anchor – 8.5′ W/6″ Round Plate
5K Drop Through Anchor – 8.5′ W/6″ Round Plate
Malta Dynamics

A6201

5K Drop Through Anchor – 8.5′ W/6″ Round Plate

Regular price $146.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The 5K Drop Through Anchor – 8.5′ is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 2.7 lbs.
● Plate Dimensions: 6″ x 3/16″
● Breaking Strength: 5,000 lbf / 22kn
● Application: Concrete Floors, Steel Girders, Steel Grates

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
5K Drop Through Anchor- 8.5′ W/4″ Round Plate
5K Drop Through Anchor- 8.5′ W/4″ Round Plate
5K Drop Through Anchor- 8.5′ W/4″ Round Plate
5K Drop Through Anchor- 8.5′ W/4″ Round Plate
Malta Dynamics

A6200

5K Drop Through Anchor- 8.5′ W/4″ Round Plate

Regular price $129.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The 5K Drop Through Anchor – 8.5′ is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 1.8 lbs.
● Plate Dimensions: 4″ x 3/16″
● Breaking Strength: 5,000 lbf / 22kn
● Application: Concrete Floors, Steel Girders, Steel Grates

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
5K Wire Rope Sling Choker - 6ft
Malta Dynamics

A6203

5K Wire Rope Sling Choker - 6ft

Regular price $29.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The 5K Wire Rope Sling – 6ft is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3′ and 6′ lengths with various terminations for versatility on the job or in a rescue kit.

Key Features:

● Meets ANSI Z359.1-2007 and ANSI A10.32-12
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Product Weight: 1.3 lbs.,
● Breaking Strength: 5,000 lbf / 22kn
● Durable & easy to use
● Steel thimble eye
● Cable resists wear around sharp edges

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Adjustable Pitch Anchor
Adjustable Pitch Anchor
Adjustable Pitch Anchor
Adjustable Pitch Anchor
Adjustable Pitch Anchor
Adjustable Pitch Anchor
Adjustable Pitch Anchor
Adjustable Pitch Anchor
Malta Dynamics

A6318-1

Adjustable Pitch Anchor

Regular price $10.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The Malta Dynamics Adjustable Pitch Roof Anchor can be easily bent to match the pitch of your roof. This anchor gives everyone who accesses the roof a reliable tie-off point without lasting damage to your rooftop. These anchor points are easily installed using 8 16d nails, not included. The Adjustable Pitch Roof Anchor is designed for reroofing, remodeling and new construction.

Key Features: 

● Easily bends over the peak of the roof
● Lightweight
● Easy to install
● Max user capacity 310 lbs.
● Main body: Alloy Steel
● Meets OSHA 1926.502 and 1910.66
● Qty 8 16d nails required (not included)

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
ALUMINUM BANTAM BEAMER
CMC

391212

ALUMINUM BANTAM BEAMER

Regular price $185.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.
  • Range: 3.5″ – 14″
  • Breaking Strength: 5,000 lbf / 22 kn
  • Weight: 3.3 lbs (1.49 kg)
  • Compliance: ANSI Z359.7 & CE-EN 795, OSHA 1926.502, OSHA 1910.66
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Anchor Plate
Anchor Plate
Anchor Plate
Anchor Plate
CMC

300615

Anchor Plate

Regular price $80.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

A CMC original design that has withstood the test of time, our Anchor Plates keep the carabiners holding the different parts of your rescue system from jamming together. The hardware becomes easier to see, making safety checks more accurate. It can also keep you from clipping a carabiner into the wrong loop of the anchor web. For anchor systems, it makes an excellent collection point. We use the Anchor Plate in CMC Rope Rescue classes, which allows our students to set up systems faster with fewer mistakes. Hole diameters: small 7/8 in (22 mm), large 2 in (51 mm)

Twenty years ago CMC introduced the Anchor Plateas a strong, lightweight, and compact collection point for connecting a rescue system to an anchor. And that point is an important feature. Over the years weve seen a steady progression of bigger, better anchor and rigging plates with more and more holes entering the market. But the bigger the plate, the less like a collection point it becomes, increasing the potential for rotation of the plate, creating additional system extension and shock-loading if any movement or failure of an anchor occurs. In 20 years of use, weve not seen an operational need for more holes, a larger size, or more weight.

Product Tip:
Besides serving as the point of distribution to any number of secure anchor points, rigging plates also serve the benefit of aligning the separate lines of a rigging system in distinct order, keeping multiple and various lines orderly. One tip when determining complementary gear to use with rigging plates; consider the versatility swivel pulleys can lend to the rigging system. They introduce rotational movement into the rigging lines running from the plate because the swivel pulley can rotate as needed to provide enhanced inline ability to clear other components within the system.

Specs

  • Aluminum
  • Item: 300610
  • Weight: 7.2 OZ (204 G)
  • Color: Red
  • NFPA Rating: General
  • 3 Sigma MBS: 45 KN (10,116 LBF)
  • Stainless Steel
  • Item: 300615
  • Weight: 9.8 OZ (278 G)
  • Color: Stainless
  • NFPA Rating: General
  • 3 Sigma MBS: 43 KN (9,666 LBF)Anchor Plate

 

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
Anchor Strap
CMC

201025

Anchor Strap

Regular price $66.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

Anchor straps have a tough job, and see a lot of wear and tear. Over the years, weve learned that cuts and abrasion are the greatest threats to their safety and service life. To dramatically increase both, our Anchor Straps now feature two layers of the same durable mil-spec, resin-coated nylon web. Sewn by our highly skilled workers who make our rescue harnesses, our Anchor Straps feature forged steel D-rings individually proof loaded and sized for easy choker (girth-hitch) configuration when desired. Sewn-on web keeper allows for improved organization when stowed. Use our sized Anchor Strap Sleeves for added edge and abrasion protection.

Note: We recommend using a Delta Quick Link connector (part #382121) to prevent possible tri-axial loading of a carabiner when used in a basket configuration.

Specs

Strength Specifications for All Sizes: 
Basket (U) Configuration:85 kN (19,108 lbf)
End-to-End Configuration: 46 kN (10,341 lbf)
Choker Configuration: 48 kN (10,790 lbf)

  • Basket (U) Configuration:85 kN (19,108 lbf)
  • End-to-End Configuration: 46 kN (10,341 lbf)
  • Choker Configuration: 48 kN (10,790 lbf)
  • Color Blue
  • NFPA Rating General Use
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Anchor Strap Sleeve
CMC

294032

Anchor Strap Sleeve

Regular price $38.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

Made from tough #4 duck canvas and a layer of vinyl coated polyester, our Anchor Strap Sleeves protect anchor straps from the elements and surface abrasion, reducing wear and tear and increasing safety and service life. Available sizes: S-XL.

Anchor Strap not included.

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
AZORP Kit (Arizona Omni Rigging Pod)
CMC

727400

AZORP Kit (Arizona Omni Rigging Pod)

Regular price $538.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The newest companion to the Arizona Vortex, the AZORP (Arizona Omni Rigging Pod) allows even greater versatility to the AZV system. The AZORP was developed by Reed Thorne and has undergone extensive testing and rigging applications with Ropes That Rescue around the world. This two-in-one rigging pod is a welcome addition to the AZV lineup and combines the versatility of having two component halves that can be used in combination, or separately, at different positions on the inner or outer AZV legs. Machined from one solid block of T-6 aluminum, it delivers superior strength with a sleek and simple design without using welds. The inner and outer AZORP pods can also be used together as a two-flange rigging pod in combination with an AZV leg compression member.
The AZORP Storage Bag features a quick-draw closure and an external carabiner loop. The main compartment has a separate sewn-in pocket to hold the AZORP quick pins. Constructed of tough, water-resistant 1,000-denier Cordura nylon.

Specs:

  • Weight: 3.4 LB (1.6 KG)
  • Dimensions (Each Pod): 6-3/8 X 4 IN (16 X 10 CM)
  • Color: Orange/Blue
  • NFPA Rating: General
  • 3 Sigma MBS: 65 KN (14,612 LBF)

Kit Includes:

  • 1 - AZORP Outer Pod (blue)
  • 1 - AZORP Inner Pod (orange)
  • 2 - Stainless Steel Quick Pins
  • 1 - AZORP Storage Bag
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Azzard Tower Climbing Connector
CMC

201828

Azzard Tower Climbing Connector

Regular price $82.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

Reed Thorne of Ropes That Rescue designed this connector to perform as a quick, one-handed attachment to a structure for maximum safety when placing belay protection. It provides quick connections to towers and other structures when protecting an ascent using a lead-climbing technique. The custom-designed aluminum ring reduces weight and provides a wide, smooth-bearing surface for the rope. The 1-in (25 mm) web has red wear indicators for easy inspection. The double-locking carabiner gate can be opened with one hand. Exceeds OSHA minimum strength requirement of 22.2 kN (5,000 lbf) for anchorage connectors.

Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. The Azzard Tower Climbing Connector can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards it falls under. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
BEAM TROLLEY
CMC

391222

BEAM TROLLEY

Regular price $379.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.
  • Beam Flange Width: 3″ – 10″
  • Breaking Strength: 5,000 lbf / 22 kn
  • Weight: 7.7 lbs (3.49 kg)
  • Compliance: ANSI Z359.7 & CE-EN 795
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Beam Walker Super Slider 12″ – 30″
Malta Dynamics

A6104

Beam Walker Super Slider 12″ – 30″

Regular price $389.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The Beam Walker Super Slider 12″ – 30″ (Part #A6104) is a large version (30” capacity) fall arrest anchor designed for use on the top flange of a steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 12″ – 30″ is designed for fall protection, rope access and work positioning. This I-Beam trolley is the best on the market for worker safety!

Key Features:

● Meets ANSI Z359.18-2017, ANSI A10.32-12 and CE-EN 795
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Beam Flange Width Range: 12″ to 30″
● Beam Flange Thickness: .25″ to 2.5″
● Breaking Strength: 5,000 lbf / 22kn
● Product Weight: 7.2-lbs / 3.35 kg

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Beam Walker Super Slider 3″ – 14″
Malta Dynamics

A6103

Beam Walker Super Slider 3″ – 14″

Regular price $159.99 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

The Beam Walker Super Slider 3″ – 14″ (Part#A6103) is a fall arrest anchor designed for use on the top flange of a steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 3″ – 14″ is designed for fall protection, rope access and work positioning. This I-Beam trolley is the best on the market for worker safety!

Key Features:

● Meets ANSI Z359.18-2017, ANSI A10.32-12 and CE-EN 795
● Compliant with OSHA 1926.502 and OSHA 1910.66
● Beam Flange Width Range: 3.5″ to 14″
● Beam Flange Thickness: .25″ to 1.25″
● Breaking Strength: 5,000 lbf / 22kn
● Product Weight: 3.3 lbs.

Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Choker Sling
PMI

SG51213

Choker Sling

Regular price $40.00 FREE Shipping on orders over $50 *some exclusions
/
Shipping calculated at checkout.

Wrapped around a beam, the new PMI Choker sling provides a quick and safe anchor. An extra piece of webbing is sewn on the entire length of the sling to protect it from sharp edges and prolong its life.

Specs

Key Features:
  • Fast connection
  • Extra layer of webbing for protection
  • Cinch strap for easy closure
  • Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    CROLL Chest Ascender
    CROLL Chest Ascender
    CROLL Chest Ascender
    CROLL Chest Ascender
    Petzl

    B16BAA

    CROLL Chest Ascender

    Regular price $74.95 FREE Shipping on orders over $50 *some exclusions
    /
    Shipping calculated at checkout.

    CROLL S
    Reinforced chest ascender for thin to medium-diameter ropes
    Designed for rope ascents, the CROLL S chest ascender is lightweight and simple to use. The attachment holes ensure efficient positioning during ascents. The stainless steel wear plate improves durability by reinforcing the rope friction zone. It is compatible with ropes measuring 8 to 11 mm in diameter.

    • Efficient and easy to use during rope ascents:

    - used with the BASIC ascender or the ASCENSION handled ascender for rope ascents
    - lower hole is angled to keep the chest ascender flat
    - upper hole for attaching a TORSE shoulder strap to keep the ascender in position
    - catch is opened by pinching, for simple, quick manipulation

    • Reinforced for durability:

    - stainless steel wear plate for improved durability
    - stainless steel cam has better resistance to corrosion

    • Adapted for intensive caving:

    - compatible with ropes measuring 8 to 11 mm in diameter
    - lightweight, only 85 g
    - toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes)

    Specs

    • Material(s): aluminum frame, stainless steel cam and wear plate, nylon safety catch
    • Weight: 85 g
    • Rope compatibility: 8 to 11 mm
    • Certification(s): CE EN 567, UIAA

    CROLL L
    Chest ascender for large diameter ropes
    Designed for rope ascents, the CROLL L chest ascender is simple to use. The attachment holes ensure efficient positioning during ascents. Thanks to the wide rope groove, it adapts perfectly to wide diameter, swollen or rigid, ropes while limiting friction. It is compatible with ropes measuring 8 to 13 mm in diameter.

    • Efficient and easy to use during rope ascents:

    - used with the BASIC ascender or the ASCENSION handled ascender for rope ascents
    - lower hole is angled to keep the chest ascender flat
    - upper hole for attaching a TORSE shoulder strap to keep the ascender in position
    - catch is opened by pinching, for simple, quick manipulation

    • Efficiency optimized for wide-diameter ropes:

    - wide rope groove limits friction on wide-diameter, swollen, or rigid ropes
    - compatible with ropes measuring 8 to 13 mm in diameter
    Adapted to any conditions:
    - toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or dirty ropes)
    - stainless steel cam has better resistance to corrosion

    Specs

    • Material(s): aluminum frame, stainless steel cam, nylon safety catch
    • Weight: 140 g
    • Rope compatibility: 8 to 13 mm
    • Certification(s): CE EN 567, UIAA

     

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    DBI/Sala Salalift II Winch
    DBI/Sala

    392003

    DBI/Sala Salalift II Winch

    Regular price $2,506.00 FREE Shipping on orders over $50 *some exclusions
    /
    Shipping calculated at checkout.

    Lightweight Work Support and Rescue Winch

    This second-generation winch provides superior performance and durability, and can be used to raise or lower a worker and to rescue or evacuate an injured victim. The free wheel allows quick delivery of the line for a worker descending a ladder. Its 6:1 gear ratio delivers an average lifting speed of 12.75 ft/min (3.9 m/min). With the 25:1 mechanical advantage, only
    12 lb (5.4 kg) of force is required to lift a 310-lb (141-kg) load. The safety hook on the stainless steel cable has a visual overload indicator, and an overload clutch provides added safety.
    A quick-mount bracket and carrying bag are included.

    Rated maximum capacity: 350 lb (159 kg).

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Doorfix Mobile Anchor
    Malta Dynamics

    EC9002

    Doorfix Mobile Anchor

    Regular price $656.99 FREE Shipping on orders over $50 *some exclusions
    /
    Shipping calculated at checkout.

    The DoorFix is a mobile anchor point and offers a smart and mobile solution at places where openings and risk of falling from height are present. The mobile anchor point DoorFix is adjustable and easy to clamp in the opening or between the door frames, using a rotatable foot. The DoorFix features two shackle points and certified as fall protection for two (2) people. The two stainless steel anchor points can be replaced between the holes, so the DoorFix can also be used in the case of a small opening up to 13.8”. Maximum distance 50”.

    Key Features:

    ● Weight 9 kg, material STAINLESS STEEL
    ● Minimum distance 13.8”
    ● Maximum distance 50”
    ● Suitable for two persons
    ● Long life due to use of sustainable materials
    ● Easy to install between openings and door frames

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    FastLink Anchor Strap
    FastLink Anchor Strap
    FastLink Anchor Strap
    FastLink Anchor Strap
    CMC

    201064

    FastLink Anchor Strap

    Regular price $112.00 FREE Shipping on orders over $50 *some exclusions
    /
    Shipping calculated at checkout.

    The Fastest Connecting Anchor Strap Solution Available!

    Standard anchor straps with D-rings on each end can create tri-axial loading on the connecting carabiner. A delta screw link connecting the two ends of the strap eliminates this hazard, but screw links are slow to fasten and add weight. Weve eliminated the D-rings and solved both problems with this new design. Simply wrap the strap around the anchor point and clip the integrated ProTech Auto-Lock Carabiner into the included 12 mm Delta Quick Link, and youre ready to connect your system.

    Specs

    Strength Specifications for All Sizes:
    Basket (U) Configuration: 45kN (10,116 lbf)
    End-to-End Configuration: 25 kN (5,620lbf)
    Choker Configuration: Not Applicable

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Flash.2 Escape Anchor
    Flash.2 Escape Anchor
    Flash.2 Escape Anchor
    Flash.2 Escape Anchor
    CMC

    300983

    Flash.2 Escape Anchor

    Regular price $119.00 FREE Shipping on orders over $50 *some exclusions
    /
    Shipping calculated at checkout.

    Delivering outstanding strength with minimal weight, the innovative CMC Flash.2 Escape Anchor is one of the lightest certified Escape Use devices available.

    Specs

    • Improved strength, meeting NFPA requirements even when loaded in-line with the tip.
    • The distinct shape allows for a firm, full-hand grip on top for rapid deployment and placement, and when loaded, directs the spine toward flat surfaces for a sturdy attachment on structural lumber and window ledges.
    • Swift girth hitching around various anchor points is achieved with the substantial slotted handle
    • The optimized point shape of the tip improves embedment, helping to keep the anchor seated when a load is applied
    • The captive eye provides greater anchoring versatility, and the 12.5 mm attachment hole accepts most escape cord or web
    • Machined from solid 7000-series, high strength aluminum, the Flash.2 delivers outstanding performance for a fast and secure egress.
    ITEM # 300983
    PRODUCT WEIGHT 7.8 OZ (222 G)
    DIMENSIONS 18 X 12 X 1.3 CM (7 X 4.75 X 0.5 IN)
    COLOR RED
    NFPA RATING ESCAPE
    3 SIGMA MBS 13.5 KN (3,034 LBF)

     

    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    General Use Anchor Sling
    PMI

    SG51029

    General Use Anchor Sling

    Regular price $47.00 FREE Shipping on orders over $50 *some exclusions
    /
    Shipping calculated at checkout.

    Setting a strong and secure anchor is easy with the right tools. Adding PMI Anchor Slings to your anchor kit gets the job done quickly and efficiently. Choose from 3 different lengths for all your rigging applications.

    Specs

    Key Features:
  • 1 3/4" webbing
  • Steel D-rings on both ends
  • Fast connection
  • 3 different lengths
  • Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    Hurley Picket Anchor System
    CMC

    303500

    Hurley Picket Anchor System

    Regular price $825.00 FREE Shipping on orders over $50 *some exclusions
    /
    Shipping calculated at checkout.

    The Hurley Picket Anchor System is a portable anchor system and can be used for the following applications: personal fall arrest, restraint, work positioning, suspension, and rescue. A portable anchor may be necessary when existing natural or manmade anchors are absent or insufficient. The Hurley Picket Anchor System optimizes the pullout capacity of the system through its patented design and precision manufacture process. The breaking strength of the anchor plate and pickets are well in excess of 40 kN as individual components*. When used in a system, the use of rope, webbing or slings will likely limit the breaking strength of the system. In addition, soil conditions will dictate the total holding strength of the system. An understanding of all components to be used in the system, soil conditions, and a careful estimation of the load to be placed on the system is essential for safe operation.

    Includes

    • 1 aluminum Anchor Plate with hard anodization
    • 3 Stainless Steel Pickets
    • 1 Striking Cap
    • 1 Removal Eye Nut
    • 1 Carry Bag

    Features

    • Developed and patented (PATENT #9,133,594 B2) by a DC fire fighter, the Hurley Picket Anchor System relies on a rigid interface between anchor plate and pickets allowing each picket to be loaded equally and instantaneously, greatly increasing pull-out capacity over a lashed or windlass picket anchor
    • Sets up in a fraction of the time required by a traditional windlass system, improving rescue operation efficiency
    • Ease of use and simplified set up reduces training time
    • Vertical Picket orientation and spacing is in accordance with a study conducted by an international industrial fabrics association on pull-out capacity of tent stakes
    • Made in USA of US and foreign components

    *40 kN WARNING: Local soil conditions will dictate the total holding strength of the anchor system. It is up to the user to understand the soil types and conditions present in the areas where the anchor system will be deployed and determine the impact on holding strength.

    A $50 flat rate shipping fee applies to this product.

    Specs

    ITEM #303500
    PRODUCT WEIGHT 23,587 G (52 LB, 832 OZ)
    ANCHOR PLATE DIMENSIONS 90.2 X 3.8 X 10.2 CM (35.5 X 1.5 X 4 IN)
    PICKET DIMENSIONS - ROUND (X3) 104.1 X 2.5 CM (42 X 1 IN)
    COLOR BLACK ANODIZED
    MATERIALS ANCHOR PLATE: ALUMINUM W/ HARD ANODIZE, PICKET (X3): STAINLESS STEEL
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart