RQ3 Gear

Boulder Helmet
Boulder Helmet
Boulder Helmet
Boulder Helmet
RQ3 by Rescue Source

HL7500

Boulder Helmet

Regular price $79.95
/
Shipping calculated at checkout.

Versatile helmet for water rescue and rope environments.

The RQ3 Boulder helmet is compact, lightweight, well-ventilated and equipped with aluminum anti-intrusion grills to protect against debris getting in but will let water drain out. The helmet’s outer shell is designed to withstand significant impact, with a chinstrap that has four fastening points so you don’t lose your helmet in case of an impact or a fall.

Specs

  • 4-point chin strap system
  • Comfortable, moisture-wicking headband and liner that can be removed to be cleaned or replaced
  • Ventilation system with metal mesh for air circulation and to prevent debris from entering the helmet
  • Headlamp/goggle retainer clips
  • Helmet adjustment dial for customized comfortable fit
  • Weight: 13.8 ozs.
  • Colors: Hi-Vis or Red
  • One size fits most with a range of 20 to 24.4 inches
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Bullet Waist Throw Bag
RQ3 by Rescue Source

BG3175

Bullet Waist Throw Bag

Regular price $44.95
/
Shipping calculated at checkout.

This bag is designed to be hands-free storage around your waist for quick deployment at any time. The bag fits into a zippered pouch with a Velcro closure and is secured to your waist for your safety. To use, open the Velcro flap and pull the throwbag free with one hand. The belt and pouch stays attached to you, deploying only the rope and the mini throwbag. If needed, the belt has a quick-release buckle to make sure the rescuer is safe from hazards or entanglement in the water.

The RQ3 Gear throwbags are all made of high-tech nylon fabric that is tough, long-lasting, ultraviolet resistant and fast-drying. All our bags feature a handle over the top and a reverse taper for easy loading. Rescue Source has adopted the clean rope principle which is a safety practice that leaves out knots whenever possible. By doing this, we no longer knot the held-end of our throwbags.

Specs

  • Hands-free storage attaches to your waist
  • Bag fits into a zippered pouch with Velcro closure
  • Bag can be deployed without unzipping pouch
  • Comes with RQ3 Mini Throwbag
  • Quick-release belt to make sure you’re snag-free in the water
  • 50 ft of rope

Rope Choice Difference

  • 1/4 inch Polypropylene rated at 1200 lbs/5.4kN
  • 1/4 inch UltraLine™ rated at 2495 lbs/11.1kN
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Edge Rescue Knife
Edge Rescue Knife
Edge Rescue Knife
Edge Rescue Knife
RQ3 by Rescue Source

KN7000

Edge Rescue Knife

Regular price $41.50
/
Shipping calculated at checkout.

Designed for the professional rescuer, this life will perform in & out of the water.

Specs

  • Blunt tip
  • 4-inch blade is one solid chrome-moly stainless steel piece: 8cr 14MoV
  • Blade is made from the same steel used to make surgical tools and offers durability, edge retention and corrosion resistance
  • Serrated edge
  • Weight: .40 lbs (6.4 oz) .18 kg
  • Length: 4″ blade 8.5″ or 215.89 mm
  • Featherweight G-10 composite scales with steady-grip texture
  • Lanyard hole
  • Window punch
  • Color: Hi-Vis
Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
Cart
Heavy Duty Equipment Bag
Heavy Duty Equipment Bag
Heavy Duty Equipment Bag
Heavy Duty Equipment Bag
RQ3 by Rescue Source

BG3195

Heavy Duty Equipment Bag

Regular price $54.95
/
Shipping calculated at checkout.

This is one tough bag! Made of heavy-duty coated mesh (for maximum air circulation) and 1680D polyester with industrial zippers and carrying straps. Our instructors have used these bags to transport water and technical gear all over the world. Its extra-large size will easily keep what you need all in one place.

Specs

  • Color: Red solid fabric with black mesh side and end panels
  • Dimensions: 25″ x 17″ x 16″
    Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
    Cart
    Lightweight Cliff Picket
    RQ3 by Rescue Source

    AN3300

    Lightweight Cliff Picket

    Regular price $94.50
    /
    Shipping calculated at checkout.

    The RQ3 Lightweight Cliff Picket is back by popular demand! When there are no rocks, trees or man-made anchors, these are a must for your rescue cache. Our 3-picket system is capable of holding thousands of pounds. Made from 1-inch DOM steel tubes, cut to lengths then hand-sanded and de-burred. The head and points are TIG welded together with a V-notch to ensure full penetration of each and every weld. We also use a custom-made tube turning machine and hand-weld each picket while the tube is turned for maximum strength.

    Third party tested by Northwest Labs of Seattle Inc.

    Specs

    • Weight: 5.9 lbs.
    • Length: 48″

    A picket will show deflection of 1 inch at 2,000 lbs. (26.68kN)

    Oversized shipping charges apply

        Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
        Cart
        Mark V Hose Inflation System
        RQ3 by Rescue Source

        FMS7100

        Mark V Hose Inflation System

        Regular price $399.00
        /
        Shipping calculated at checkout.

        The Mark V Hose Inflation System is a must-have with many swiftwater and ice rescue teams. The kit also contains a pre-set safety relief valve on the cap, universal quick connecting system, and a fill hose with SCBA high-pressure valve and wheel. This makes filling from your SCBA tank easy and safe.

        Kit Includes

        • 2-1/2″ female aluminum hose cap with tie down for securing safety lines
        • 2-1/2″ male aluminum hose cap with standard quick disconnect to attach filler hose
        • Tie down for securing a safety line
        • Pressure relief valve set at 35-40 lbs. for safety
        • Shield to protect fittings
        • SCBA high-pressure valve and wheel with hose so you can fill from you own high-pressure SCBA bottles
        • Powder-coated for durability
        • Custom storage and carrying case included
        • These fit Standard 2-1/2 inch NST hoses (System designed for 50 ft. of hose)
        Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
        Cart
        Max-Wear Kevlar Gloves
        Max-Wear Kevlar Gloves
        Max-Wear Kevlar Gloves
        Max-Wear Kevlar Gloves
        RQ3 by Rescue Source

        GL8910M

        Max-Wear Kevlar Gloves

        Regular price $34.50
        /
        Shipping calculated at checkout.

        The RQ3 Max-Wear gloves are designed for all rigors of rescue work. Whether in the water or on the side of a cliff, these rescue gloves will help you get the job done. These are the best crossover water rope gloves on the market.

        Specs

        • Kevlar palms, fingers and stitching for long life
        • Molded knuckle protection for shock-absorbing protection
        • Velcro wrist closure for secure fit
        • Puncture and cut resistant
        • Soft and lightweight breathable stretch material on back of hand
        • Clip on wrists help keep gloves together
        • Color: Black
        • Sizes: M-XXL

        Size Guide

        SIZE WIDTH LENGTH
        M 3 1/2" 7 1/2"
        L 3 3/4" 7 3/4"
        XL 4" 8"
        XXL 4 1/2" 8 1/2"
            Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
            Cart
            Mesh Duffel Bag
            RQ3 by Rescue Source

            BG3085L

            Mesh Duffel Bag

            Regular price $37.95
            /
            Shipping calculated at checkout.

            A great bag for your wet river gear. Mesh allows for quick drying. Carrying handles allow hand, shoulder or back transport. Made of tear-resistant black nylon jersey mesh and 900D polyester with fabric mesh. There is also an exterior pocket with a zipper closure.

            Kit Includes

            • Measures: 35″ x 17″ x 17″
            • Color: Black
            Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
            Cart
            MOLLE Pockets
            MOLLE Pockets
            MOLLE Pockets
            MOLLE Pockets
            MOLLE Pockets
            MOLLE Pockets
            RQ3 by Rescue Source

            BG1270S

            MOLLE Pockets

            Regular price $7.50
            /
            Shipping calculated at checkout.

            The MOLLE pouches featured work well with both our Storm SAR Jacket, our RQ3 Rak-Pak, the Mustang Universal Swift Water Rescue Vest or the Mustang Rescue Swimmer Vest.

            BG1270N – The Narrow MOLLE Pocket measures 15″ tall x 4.5″ wide x 1″ deep. It has a flap closure with Velcro and is the perfect size to hold a brake bar rack or any other similar sized item

            BG1270L – Labeled the Universal MOLLE Pocket, this pouch measures 6.5″ x 8″ x 1″ and has a heavy-duty mesh front that allows you to see the contents without opening it. It has a flap closure with Velcro and is the perfect size to hold a Figure 8, 4″ pulley or any other similar sized item.

            BG1270S – The Multi-Use MOLLE Pocket is the smallest and measures 5″ x 5″ x 1″. It has a heavy-duty mesh front that allows you to see the contents without opening it. It has a flap closure with Velcro and is the perfect size to hold an O-ring, swivel, or any other similar sized item.

            Specs

            Pocket Size - Multi-use (5" x 5" x 1"), Universal (6.5" x 8" x 1"), Narrow (15" tall x 4.5" wide x 1" deep)
                      Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                      Cart
                      Personal Mini Throw Bag
                      RQ3 by Rescue Source

                      BG3116

                      Personal Mini Throw Bag

                      Regular price $27.95
                      /
                      Shipping calculated at checkout.

                      The RQ3 Gear throwbags are all made of high-tech nylon fabric that is tough, long-lasting, ultraviolet-resistant and fast-drying. All our bags feature a handle over the top and a reverse taper for easy loading. Rescue Source has adopted the clean rope principle which is a safety practice that leaves out knots whenever possible. By doing this, we no longer knot the held-end of our throwbags.

                      Specs

                      • This bag is designed to be compact in size
                      • Fits 50′ of ¼” diameter rope of your choice
                      • It comes with a Fastek Buckle to easily attach to your PFD or belt
                      • It also has a Bullet Bag option
                      • Has internal foam flotation that keeps the bag floating in the water

                      Rope Choice Difference

                      • 1/4 inch Polypropylene rated at 1200 lbs/5.4kN
                      • 1/4 inch UltraLine™ rated at 2495 lbs/11.1kN
                      Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                      Cart
                      Picket Anchor Plate
                      RQ3 by Rescue Source

                      AN3308

                      Picket Anchor Plate

                      Regular price $94.50
                      /
                      Shipping calculated at checkout.

                      The RQ3 Picket Anchor Plate is an invaluable tool to utilize in conjunction with the cliff picket anchors you create. When used it produces a reliable mode for attaching your systems. It provides optimum spacing for the pickets and eliminates the need to use webbing to tie one picket to another. On the end of the anchor plate is the attachment point, which is raised for easy access. Made to the same high standards as our other RQ3 rigging plates, the Picket Anchor Plate was specifically designed to work with the RQ3 Cliff Pickets.

                      Specs

                      • Five picket holes
                      • One anchor attachment point
                      • One raised end for easy access to webbing and anchor attachment points
                      • Strength: 12,000 lbs (53 kN).
                      • Length: 35″
                      • Weight: 3.1 .lbs
                      Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                      Cart
                      Picket Carrying Case
                      RQ3 by Rescue Source

                      AN3309

                      Picket Carrying Case

                      Regular price $95.00
                      /
                      Shipping calculated at checkout.

                      The RQ3 Picket Carrying Case is designed to hold our system perfectly. It is a steel-coated case that is compact, easy to carry and sturdy enough to ensure you can get the anchor system to any rescue. It can be worn over the shoulder, across the body or can mount in rescue vehicles with brackets (Mounting Brackets sold separately).

                      Specs

                      • Plate to secure fit anchor plate in place
                      • Use nylon strap with rubber pad two ways — over shoulder or across body
                      • Includes plates with notches for secure system fit
                      • Includes Cam-lock buckles to secure system into case
                      • Picket/Driver Puller does not fit in case (carried separately)
                      • Made in the USA
                      Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                      Cart
                      Picket Driver/Puller
                      RQ3 by Rescue Source

                      AN3307

                      Picket Driver/Puller

                      Regular price $225.00
                      /
                      Shipping calculated at checkout.

                      The RQ3 Picket Driver is designed to make installing picket systems as efficient and safe as possible. Weighing in at 11.2 pounds, RQ3 Picket Driver is made of two inch diameter, eighth inch thick, drawn over mandrel steel tubing. The 18 inch body keeps the picket aligned with the direction of each drive-stroke, ensuring every strike drives the stake deeper into the ground without any energy wasted to the sides. The driver handles are bent at right angles and MIG welded to the body at right angles, allowing for numerous different holds on the driver to maximize user ergonomics and the force of each blow. The weighted end cap is 2 ½ inches wide and welded using the TIG method. Weight in the cap end increases the force of each strike delivered by the user, reducing the overall number of strokes required to sink the stake. Fewer strikes delivered along the full length of the picket, rather than off-angle, extends the life of the stake an estimated ten times longer than a picket driven with a sledgehammer or post driver. The RQ3 Picket Driver/Puller is designed to be used with RQ3 pickets only manufactured after February 2016. Other pickets may damage the Picket Driver/Puller head and void the warranty.

                      Specs

                      • Weight: 11.2 lbs.
                      Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                      Cart
                      Picket System
                      Picket System
                      Picket System
                      Picket System
                      Picket System
                      Picket System
                      Picket System
                      Picket System
                      RQ3 by Rescue Source

                      KT1750

                      Picket System

                      Regular price $645.00
                      /
                      Shipping calculated at checkout.

                      The RQ3 Picket System includes: 

                      • Three RQ3 Cliff Pickets
                      • 1 RQ3 Picket Anchor Plate
                      • 1 RQ3 Picket Driver and Case

                      RQ3 Cliff Pickets When there are no rocks, trees or man-made anchors, our pickets are a must for your rescue cache. Our 3-picket system is capable of holding thousands of pounds. Made from 1-inch DOM steel tubes, cut to lengths then hand-sanded and de-burred. The head and points are TIG welded together with a V-notch to ensure full penetration of each and every weld. We also use a custom-made tube turning machine and hand-weld each picket while the tube is turned for maximum strength.

                      RQ3 Picket Anchor Plate is an invaluable tool to utilize in conjunction with the cliff picket anchors you create. When used it produces a reliable mode for attaching your systems. It provides optimum spacing for the pickets and eliminates the need to use webbing to tie one picket to another. On the end of the anchor plate is the attachment point, which is raised for easy access. Made to the same high standards as our other RQ3 rigging plates, the Picket Anchor Plate was specifically designed to work with the RQ3 Cliff Pickets. It features five picket holes, one anchor attachment point, and one raised end for easy access to webbing and anchor attachment points.

                      RQ3 Picket Driver/Puller is unique because it not only drives in the pickets but it also pulls them out when you are done. When you use the driver with your cliff pickets you are extending their service life 10 to 1 compared to solid pickets. The Picket Driver is made of case-hardened steel and the handles are TIG-welded for strength and for an extended life. Weight: 11.2 lbs. The RQ3 Picket Driver/Puller is designed to be used with RQ3 pickets only manufactured after February 2016. Other pickets may damage the Picket Driver/Puller head and void the warranty.

                      Picket System Case Keep your picket system safe and organized in a steel-coated case. The case has Cam-Lock buckles to secure the system and has a nylon strap with rubber pad to wear the system over shoulder or across the body. This case allows you to easily carry the system to the location you need an anchor system. It is compact and easily fits in any truck. (The driver is carried separately and does not secure into the case)

                      Specs

                      • Overall weight of system with case: 41 lbs.
                      • Overall size: 52″ x 15″ x 4″
                      • Oversized shipping charges apply
                      Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                      Cart
                      PPE Equipment Duffel
                      RQ3 by Rescue Source

                      BG3500

                      PPE Equipment Duffel

                      Regular price $39.50
                      /
                      Shipping calculated at checkout.

                      The RQ3 PPE Equipment Duffel is an easy solution for any storage and organizational problems. This all-around efficient gear duffel is sure to make your life more convenient when you can just grab your gear and go!

                      Specs

                      • Made with 1680D polyester and mesh upper which helps gear stay dry and allows airflow
                      • A shoulder carry strap
                      • Webbing handles
                      • Heavy-duty construction for rugged use
                      • For smaller items, there is a full-size pocket on one end for storage
                      • Color: Red/Black
                      • Size: 30″ x 16″ x 16″
                      Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                      Cart
                      Rak Pak
                      Rak Pak
                      Rak Pak
                      Rak Pak
                      Rak Pak
                      Rak Pak
                      Rak Pak
                      Rak Pak
                      RQ3 by Rescue Source

                      BG3475

                      Rak Pak

                      Regular price $225.00
                      /
                      Shipping calculated at checkout.

                      Made from 900D Color Black Polyester

                      The new and improved Rak Pak is redesigned for maximum versatility and comfort. You can wear it like a backpack or stow the shoulder straps and carry it using the handles. Removable internal and external MOLLE platforms keep your gear organized. External compression straps tighten the load and prevent it from shifting during transport. Also included is a small ground cloth to keep gear out of the dirt. You choose the right size and shaped pocket or strap for your gear, attach it to one of the MOLLE panels, and keep it secure and organized in the pack.

                      Size: 24” long 15” wide and 8” deep

                      Specs

                      • Padded backpack straps, waistbelt and sternum strap that can be stored inside, out of the way
                      • Additional Molle on the outside of the main bag
                      • 5 Molle panels (13” x 17”) that clip in to the main bag so they stay put
                      • 4 outside heavy-duty compression straps so the load doesn’t bounce around during transport
                      • 2 inside mesh pockets for soft goods such as webbing and prusiks
                      • Assortment of pockets for secure storage and small ground cloth to keep your gear protected
                      • Material: 900D color black polyester
                      • Item# BG3475   Rak Pak (with pockets)
                        Molle Pockets included: BG1270S-5, BG1270L-3, BG1270N-3

                                Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                Cart
                                Rescue Pulleys
                                Rescue Pulleys
                                Rescue Pulleys
                                Rescue Pulleys
                                RQ3 by Rescue Source

                                PU8708N

                                Rescue Pulleys

                                Regular price $85.95
                                /
                                Shipping calculated at checkout.
                                UL Classified to NFPA 1983 General Use

                                Years ago when Rescue 3 Instructor Trainer Barry Edwards designed these pulleys his primary goal was to make them strong but weigh less. The side plates are made of high grade aluminum and are slimmer than other pulleys, with a series of holes to cut down on the weight. The bolt, washers, lock nuts, and sealed ball bearings are stainless steel, to stand up to the conditions of the rescue environment. Manufactured by Seattle Manufacturing Company, one of the leading industry professionals in the rescue market.

                                Specs

                                • High-grade aluminum side plates
                                • Stainless Steel components for long working life
                                • Prusik minding design

                                PU8708N  2″ Double Prusik Minding with Becket
                                2″ x 1/2″   6.25″ x 3″ x 1.5″  8,093 lbf. (36kN)  .82 lbs
                                Becket: 4,386 lbf (19.5kN)

                                PU8710 4″ Single Prusik Minding
                                4″ x 1/2″  5″ x 3″ x 1.25″  11,200 lbf. (49.8kN)   1.3 lbs

                                              Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                              Cart
                                              Rescue Q-Eight
                                              RQ3 by Rescue Source

                                              FE2121N

                                              Rescue Q-Eight

                                              Regular price $55.50
                                              /
                                              Shipping calculated at checkout.

                                              Manufactured by SMC.

                                              Specs

                                              • UL Classified to NFPA 1983 General Use
                                              • Descender designed for rescue and tactical operations teams
                                              • Performs exceptionally well in high-wear situations
                                              • Designed for 12mm rope
                                              • The unique design allows you to tie off easier and safer than any other eight plate yet it works the same as traditional eights
                                              • Weight: 8.64 oz.
                                              • Material: 6061T 6511 Aluminum Stock
                                              • Strength: 4,946 lbf (22kN)
                                              • Dimensions: 7″ x 5″ x 0.5″
                                                Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                                Cart
                                                Rope Bags
                                                Rope Bags
                                                Rope Bags
                                                Rope Bags
                                                RQ3 by Rescue Source

                                                BG3225O

                                                Rope Bags

                                                Regular price $41.00
                                                /
                                                Shipping calculated at checkout.

                                                Our rope bags are tough and affordable. To maximize service life, we’ve used rip-stop nylon, molded carry handles, and contoured back pack straps. Clear sleeve pockets on the bag can hold rope logs and other information, keeping the bag ready and in the field.

                                                Specs

                                                • Contoured backpack-style shoulder straps with integrated handle
                                                • Clear-view sleeve for rope log or rope I.D.
                                                • Side carry handle allows for easy loading and unloading from apparatus
                                                • Exterior gear loops for attaching carabiners
                                                • Pack cloth for easy stuffing
                                                • Gromett with Velcro strap at bottom
                                                • Made of 1680D polyester
                                                • Colors: Orange or Red
                                                • Sizes: Model #2 holds 150-200 ft of 1/2 inch rope
                                                • Model #3 holds up to 300 ft of 1/2 inch rope

                                                 

                                                            Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                                            Cart
                                                            Rope Log
                                                            RQ3 by Rescue Source

                                                            RP9932

                                                            Rope Log

                                                            Regular price $6.99
                                                            /
                                                            Shipping calculated at checkout.

                                                            The RQ3 All-Weather Rope Log contains 9 rope log forms on Rite in the Rain waterproof paper. Plenty of space is provided to document critical lifeline information and log use and inspection. Cover comes with space to include all the specifications for your rope along with rope care instructions. The compact size of this booklet allows for easy storage within a rope bag.

                                                            Specs

                                                            • Size: 5 ¼ x 8 ½ inches

                                                            Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                                            Cart
                                                            Rope/Gear Bag
                                                            RQ3 by Rescue Source

                                                            BG3237

                                                            Rope/Gear Bag

                                                            Regular price $51.95
                                                            /
                                                            Shipping calculated at checkout.

                                                            The RQ3 Rope/Gear bag is designed to keep your rope and hardware in one place so all you have to do is grab and go.

                                                            Specs

                                                            • Rolled seams and extra fabric around the bottom grommet for reinforcement.
                                                            • An interior loop keeps rope firmly in place
                                                            • The top of the bag is made of pack cloth for easy closing
                                                            • Two large zippered gear pockets on front
                                                            • Rolled seams and extra reinforced fabric on bottom
                                                            • Daisy chain on each side to secure hardware on the outside of the bag
                                                            • Shoulder straps for easy transport
                                                            • Made of  600D polyester fabric for long life
                                                            • Size: Holds up to 200 ft of 1/2″ rescue rope
                                                            • Dimensions: 9″ x 27″ diameter
                                                            • Color: Black/Grey

                                                             

                                                                          Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                                                          Cart
                                                                          Second Chance Throwbag
                                                                          RQ3 by Rescue Source

                                                                          BG3144

                                                                          Second Chance Throwbag

                                                                          Regular price $68.50
                                                                          /
                                                                          Shipping calculated at checkout.

                                                                          We designed this bag with colder weather in mind. It’s our Standard Rope Bag with 75′ of 3/8″ Grabline, making it the easiest-to-grip rope. A second chance ball is on the end of the rope. Not only does it add flotation, it is easier to grip even when wearing the thickest gloves. The ball is also easier to be seen and grabbed than a coil of rope for the victim.

                                                                          The RQ3 Gear throwbags are all made of high-tech nylon fabric that is tough, long-lasting, ultraviolet-resistant and fast-drying. All our bags feature a handle over the top and a reverse taper for easy loading. Rescue Source has adopted the clean rope principle which is a safety practice that leaves out knots whenever possible. By doing this, we no longer knot the held-end of our throwbags.

                                                                          Specs

                                                                        • Standard bag
                                                                        • Second chance ball adds floatation
                                                                        • Easy to grip in cold conditions
                                                                        • 75ft 3/8” Grabline rated at 3282lbs/14.6kN

                                                                        • The Second Chance Ball can be retrofitted to your existing bag. It can be purchased separately MS1900
                                                                          Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                                                          Cart
                                                                          Standard Throwbag
                                                                          RQ3 by Rescue Source

                                                                          BG3118

                                                                          Standard Throwbag

                                                                          Regular price $35.95
                                                                          /
                                                                          Shipping calculated at checkout.

                                                                          Designed to be a “work horse” bag. Its bright red top helps for visibility in all conditions. It can hold 50′ to 75′ of 3/8″ diameter rope of your choice. Has internal foam flotation that keeps the bag floating in the water.

                                                                          The RQ3 Gear throwbags are all made of high-tech nylon fabric that is tough, long-lasting, ultraviolet resistant and fast-drying. All our bags feature a handle over the top and a reverse taper for easy loading. Rescue Source has adopted the clean rope principle which is a safety practice that leaves out knots whenever possible. By doing this, we no longer knot the held-end of our throwbags.

                                                                          Specs

                                                                          • Nylon fabric that stands up to UV rays and is quick-drying
                                                                          • Handle over the top
                                                                          • Reverse taper for easy loading

                                                                          Rope Length Choices:
                                                                          • 50 ft
                                                                          • 75 ft

                                                                          Rope Types Available:
                                                                          • 3/8″ Polypropylene rated 1900 lbs/8.4kN
                                                                          • 3/8″ Ultraline rated 5237 lbs/23.3kN
                                                                          • 3/8″ Grabline rated 3282 lbs/14.6kN

                                                                          All you have to do to customize your bag is select your rope length and type. Once you’ve picked the perfect bag for you or your team, we assemble it on site in Wilton, CA to ensure the “perfect stuff,” so your bag is ready to use as soon as you buy it.
                                                                              Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                                                              Cart
                                                                              Storm Alpha Helmet
                                                                              RQ3 by Rescue Source

                                                                              HL7200B

                                                                              Storm Alpha Helmet

                                                                              Regular price $48.95
                                                                              /
                                                                              Shipping calculated at checkout.
                                                                              Conforms to CE EN 1385:2012 helmet standards

                                                                              This helmet features the same strong ABS outer shell as our RQ3 Storm Pro Helmet however allows for ultimate customization, with detachable ear pieces and foam, attachable visor and is set up to securely fit a headlamp.

                                                                              Specs

                                                                            • Lightweight strong ABS outer shell gives you superior security and protection
                                                                            • Multiple ventilation slots to keep your head cool and drain water quickly
                                                                            • Ergonomic-designed EPS padding
                                                                            • Adjustable ratchet system for one-size-fits-most sizing
                                                                            • 6-point chin strap with cranial support for head protection

                                                                            • Includes:

                                                                            • A pair of removable foam ear pieces for protection, warmth or impact
                                                                            • Back clip to secure headlamp or goggles to helmet
                                                                            • Strap for securing a headlamp on the front of the helmet
                                                                            • Tinted visor
                                                                            • 2 Velcro pads to display patches
                                                                            •  

                                                                              Colors: Red, Yellow, Matte Black
                                                                              Size: One size fits most (fits head circumference from 21.6″ – 24″)

                                                                                Have questions or concerns about your order? Please email us at sales@saferescue.com. Please note that we are not currently accepting returns or exchanges.
                                                                                Cart