Malta Dynamics

The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated steel construction means longer lasting product life. Supplied with all necessary fasteners.

Key Features:

● Meets OSHA 1910, OSHA 1926 Subpart M, and ANSI A10.32-12
● Can be installed with screws or nails
● Fits up to 12/12 roof pitch
● Fasteners provided
● For temporary use on wood rooftops
● Worker Capacity Range: 130-310 lbs.
● Material: Galvanized steel
● Min. Breaking Strength: 5,000 lbs.

Specifically designed for permanent use on wood rooftops, these roof safety anchors are manufactured with two alloy D-ring ends, is 18″ long and composed of stainless steel for an exceptionally long life. Like all of our products, the Malta Dynamics Permanent Roof Anchor is 100% compliant with all applicable OSHA and ANSI regulations. The Permanent Roof Anchor is manufactured to ensure ease of installation and is ideal for both residential construction and maintenance work.

Key Features:

• Easy to install
• Exclusive hole layout reduces damage to truss during install
• Lightweight and durable
• Can be installed with screws or nails
• Fasteners provided (nails)
• Discreet design
• Intended for permanent use on wood rooftops.
• Meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1-07, and ANSI A10.32-12
• Worker Capacity Range: 130-310 lbs.
• Material: Stainless Steel body and Alloy D-rings
• Min. Breaking Strength: 5,000 lbs

The Malta Dynamics 5K Swivel Anchor is used in our Grabber Mobile Fall Arrest System and connects to the top of an RA12.  This particular anchor rotates 360 degrees and flips 180 degrees. The swivel anchor can be used on steel flanges or concrete substrates. The safe working load for this product is 2,000 pounds and has an ultimate breaking strength of 5,000 pounds. This anchor is composed of zinc plated steel.

Key Features:

● Meets ANSI Z359.18-2017 and ANSI A10.32-12
● Compliant with OSHA 1910 and OSHA 1926 Subpart M
● Product Weight: 1.1 lbs.
● Simple mount and bolt on system
● Easy installation and removal
● Swivels full 360°
● Great for first-man-up system
● Worker Capacity Range: 130-310 lbs.
● Material: Zinc plated steel
● Min. Breaking Strength: 5,000 lbs.

The Malta Dynamics Adjustable Pitch Roof Anchor can be easily bent to match the pitch of your roof. This anchor gives everyone who accesses the roof a reliable tie-off point without lasting damage to your rooftop. These anchor points are easily installed using 8 16d nails, not included. The Adjustable Pitch Roof Anchor is designed for reroofing, remodeling and new construction.

Key Features: 

● Easily bends over the peak of the roof
● Lightweight
● Easy to install
● Max user capacity 310 lbs.
● Main body: Alloy Steel
● Meets OSHA 1926.502 and 1910.66
● Qty 8 16d nails required (not included)

Complete 2 Person 60ft Adjustable Horizontal Lifeline System for workers accessing and performing work from elevated concrete beams or I-beams.  Quick and easy set-up. System includes: Two (2) Stanchion Posts (P-00041-10) and One (1) Horizontal Lifeline Fall Protection Cable Assembly (P-00147-60). For temporary use only.

—

Complete 2 Person 60ft Adjustable Horizontal Lifeline System for workers accessing and performing work from elevated concrete beams or I-beams.  Quick and easy set-up. System includes: Two (2) Stanchion Posts (P-00041-10) and One (1) Horizontal Lifeline Fall Protection Cable Assembly (P-00147-60). For temporary use only.

Stanchion post for bolting to concrete or steel beams. Max Flange 1/2” to 12” (steel). Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System.

Stanchion post for clamping to steel I-beams – Fits flange  thicknesses form 1/2″ to 2 1/4″ . Fits flange widths from 8″ to 22″.  Simple easy set up! Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System.

Horizontal Lifeline Fall Protection Cable Assembly attaches between either two MD posts for steel I-beams (P-00041-1) or between two MD posts for concrete beams (P-00041-10) to complete a two (2) person horizontal lifeline fall protection system. Sold as one (1) each. For temporary use only.

In-line shock absorber to be used as part of either MDK-0060-S – Deploys when a fall occurs to dampen the impact load to MD I-beam or concrete stanchions. Also reduces the bounce of the horizontal cable which minimizes the chance of cascading (when an SRD’s brakes lock, unlock, lock etc). Old as one (1) each. For Temporary use only.

Intermediate by-pass adapter can be added to any MD post to help workers continue along the horizontal path of the i-beam or concrete beam they are walking on. The unique design keeps the systems horizontal cable in place while still allowing workers enough room to pass the snap hook of their lanyard through the intermediate adapter without ever needing to disconnect from the horizontal lifeline cable system. Additional posts are commonly used in areas where not much clearance exists from where workers are walking on the beams to an obstruction below, typically the graound. Reduces the amount of horizontal cable sag. Sold as one (1) each.

The aluminum alloy tripod is built to support one worker up to 310 lbs. Our tripod with optional winch rentals is designed for safe access and emergency rescue in confined spaces including sewers, wells, underground pipe and tunnels.

Tripod Manual

The Malta Dynamics 100′ 3-Way Recovery SRL is built to blend functionality and affordability. Easy to handle, adjust, and install, it is both durable and dependable. With a quick-activating retrieval mechanism for emergency evacuation, you can expect superior performance and 100% reliability from the Malta Dynamics Rescue line of SRLs. This Block allows the fall to arrest and also allows easy hoisting of the victim with the help of its inbuilt winch mechanism.

● Conforms to ANSI Z359.14-2012 SRL-R
● ANSI Capacity Range: 130-310 lbs.
● Superior Durability
● Lifeline Material: Galvanized Steel
● The locking pin on the side of the casing at the base of the handle allows this dual system to work in independent Fall Arrest & Winch modes.
● Minimum Breaking Strength > 3000lbs.
● Weight: 40 lbs.
● Retractable mode enables easy movement of user in Confined Space. Also provides Fall Protection.
● Winch mode enables easy retrieval.
● Come with Snap Hook with Impact Indicator
● Velcro added on the handle of the Block for safe transportation by keeping the handle in place.
● The Handle is deployed only when Winch functionality is activated.
● For overhead use only

The Malta Dynamics Warthog Vertical Lifeline Assembly is a full kit built to the strongest conventional (VLA) vertical lifeline assemblies available today. It is resistant to rot and mildew and exceptionally resistant to alkalis and most solvents. The Polyester Rope Vertical Lifeline Assembly offers protection against abrasion and is heat resistant. It has a melting point of over 300°F. Vertical Lifelines may be used for either fall arrest (as part of a P.F.A.S. – personal fall arrest system) or for restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. This kit includes an integral shock absorbing device, a positioning device, and a 18″ extension lanyard.

● Complete Assembly Includes: Three Strand White Polyester Rope, Shock Absorber, Positioning Device and 18″ Extension Lanyard
● Durable and Remains Flexible
● Terminated by Stitch and Plastic Casing
● Includes Alloy Steel Snaphook
● UV Resistant
● 5/8″ Polyester 3-Strand Rope
● Meets ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M and OSHA 1910
● Minimum Breaking Strength: 5,000 lbs.
● Worker Capacity Range: 130-310 lbs.
● Webbing Material: Polyester, Alloy Steel and Nylon

The Malta Dynamics Warthog Fall Arrestor Rope Grab is durable and built to last on the jobsite. Manufactured from galvanized steel, the product is easy to install and designed to lock automatically in the event of a fall. Malta Dynamics’ Fall Arrestor Rope Grabs are 100% universal. They are compatible with ropes 5/8″ thick.

● Durable Engineering
● Removable Rope Grabs are Easy to Install
● Fits 5/8″ Thick Safety Ropes
● Locks Automatically When a Fall Occurs
● Meets ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M and OSHA 1910
● Minimum Breaking Strength: 5,000 lbs.
● Worker Capacity Range: 130-310 lbs.
● Galvanized Steel, Nylon

The Malta Dynamics Warthog Vertical Lifeline Rope W/Snap Hook is one of the strongest conventional (VLA) vertical lifeline assemblies available today. It is resistant to rot and mildew,  alkalis and most solvents. The Polyester Rope Vertical Lifeline Rope offers protection against abrasion and is heat resistant. It has a melting point of over 300°F. Vertical Lifelines may be used for either fall arrest (as part of a P.F.A.S. – personal fall arrest system) or for restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard.

● Durable and Remains Flexible
● Terminated by Stitch and Plastic Casing
● Includes Alloy Steel Snaphook
● UV Resistant
● 5/8″ Polyester 3-Strand Rope
● Meets ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M and OSHA 1910
● Minimum Breaking Strength: 5,000 lbs.
● Worker Capacity Range: 130-310 lbs.
● Webbing Material: Polyester, Alloy Steel and Nylon

The Malta Dynamics Dual SRL Connector is easy to use and installs quickly. It easily attaches to any harness webbing beneath the dorsal D-ring. The dual SRL connector is to be used to combine two single leg SRLs into a dual-leg kit.

Key Features:

● Meets ANSI Z359.12-2009 and ANSI A10.32-12
● OSHA Compliant
● Product Weight: under 1 lbs.
● Heavy Duty
● Maintain 100% tie-off
● Easy to use one hand operation
● Offer maximum strength to 5,000 pounds
● 3,600 lb. (16kN) Gate
● Securely attach lanyards or lifelines to anchorages

The Malta Dynamics Tower Hook Carabiner is a larger version of the High Strength Steel Locking Carabiner. It is designed to be durable and easy to use. The wider gate allows for increased versatility.   With the Tower Hook Carabiner you can attach one component to another and maintain maximum strength and durability.

Key Features:

● Meets ANSI Z359.12-2009 and ANSI A10.32-12
● OSHA Compliant
● Heavy Duty
● Easy to use one hand operation
● Offer maximum strength to 5,000 pounds
● 3600 lb. (16kN) Gate
● Securely attach lanyards or lifelines to anchorages
● 2.04” Gate Opening
● Net Weight: 1.65 lbs.

The Malta Dynamics High Strength Steel Locking Carabiner is designed to be durable and easy to use. Its ANSI tested gate is certified to withstand loads up to 3,600 pounds. This carabiner is self-closing and self-locking, and can be opened with just one hand.

Key Features:

● Meets ANSI Z359.12-2009 and ANSI A10.32-12
● OSHA Compliant
● Product Weight: 0.58 lbs.
● Heavy Duty
● Easy to use one hand operation
● Offer maximum strength to 5,000 pounds
● 3600 lb. (16kN) Gate
● Securely attach lanyards or lifelines to anchorages
● 1” x 4-7/8” x 3-1/8” x 1” Gate Opening

The Malta Dynamics 18ft. Ladder Rescue System with Belay is designed for rescuing a worker in the event of a fall with minimal prior rescue training. The system is simple to deploy using the existing or a temporary anchor point. The Ladder Rescue System allows the victim to climb efficiently and safely with the added safety of the rope grab system.

● Compliant with OSHA 1910.66 and OSHA 1926.503
● Product Weight: 10.9 lbs.
● Progress Capture Pulley (Belay Device)
● 2” Heavy Duty Black Nylon Webbing Ladder
● Aluminum bar rungs sewn into heavy duty black webbing
● Static 11mm nylon rope
● ANSI Steel Carabiner
● Ballistic nylon deployment bag

The X1260 XSERIES Mobile Grabber is a mobile fall arrest system that provides overhead anchor points anywhere, any time.  The X1260 model is the latest model from Malta Dynamics, using innovative technology to provide the ultimate in flexibility in your overhead anchorage. The X1260 offers the flexibility to provide up to five workers with overhead anchor points and includes a 5-foot extendable mast that provides one worker overhead tie-off up to 34 feet in height. The unit supports a maximum anchor capacity of 310 pounds.

The X1260 features an electric-driven hydraulic lift system operated by remote control with E-Stop. All XSERIES models are tested to meet OSHA fall protection codes. They are road-towable and can be towed by nearly any vehicle on the market, and also feature built-in fork pockets for easy transport indoors.

The X1250 XSERIES Mobile Grabber is a mobile fall arrest system that provides overhead anchor points anywhere, any time.  The X1250 model is an upgrade over the X1240 model, offering three overhead anchor points and adding a 5-foot extendable mast that provides one worker overhead tie-off up to 34 feet in height. Both support a maximum anchor capacity of 310 pounds.

The X1250 features an electric-driven hydraulic lift system operated by remote control with E-Stop. All XSERIES models are tested to meet OSHA fall protection codes. They are road-towable and can be towed by nearly any vehicle on the market, and also feature built-in fork pockets for easy transport indoors.

The X1240 XSERIES Mobile Grabber is a mobile fall arrest system that provides overhead anchor points anywhere, any time.  The X1240 model is an upgrade over the X1000 model, offering two overhead anchor points up to 30 feet in height, and supporting additional maximum anchor capacity, up to 310 pounds.

The X1240 features an electric-driven hydraulic lift system operated by remote control with E-Stop. All XSERIES models are tested to meet OSHA fall protection codes. They are road-towable and can be towed by nearly any vehicle on the market, and also feature built-in fork pockets for easy transport indoors.

The X1000 XSERIES Mobile Grabber is a mobile fall arrest system that provides overhead anchor points anywhere, any time. The X1000 model is our most affordable model, tested to meet OSHA fall protection codes, offers two overhead anchor points up to 22 feet in height, and supports a maximum anchor capacity of 310 pounds. The unit is road-towable and can be towed by nearly any vehicle on the market, and also features built-in fork pockets for easy transport indoors.

The X1000 XSERIES Mobile Grabber model is completely manual, operated by a hand-pumped hydraulic system, providing the most cost-effective way to ensure workers always have an overhead anchorage—anytime, anywhere.