Climbing Technology

This lightweight Rope-Access Backup device is designed for maximum performance in the most demanding rope access environments. Certified to EN 353-2:2002 as a guided type fall arrester for flexible lifeline, as we all as EN 12841:2006-A/B for rope access systems.

Specs

• Lightweight
• Easy to place on and off rope
• Grips well on dirty or icy ropes
• Locking mechanism for stationary working

Double pulley with locking cam, designed for use as a ratchet pulley in a lightweight haul system with the UP ROLL pulley.

Specs

• Anodized light alloy side plates
• Cast stainless steel cam
• Alloy pulleys with ball bearings
• Freelock system allows one-handed cam action

Left or right-hand light alloy ascender handle with ergonomic rubber grip for climbing ropes.

Specs

From Climbing Technology comes their RollNLock ultralight pulley/ascender designed for work at height, rope climbing, rescue and self-rescue situations. *Fits 8-13 mm rope sizes, EN 892/EN 1891; AND 10-16 mm web.

Specs

• Spring-operated cam for use as a rope ascender;
• Sliding lock for use as a pulley;
• Ideal for crevasse rescue;
• Allows hauling of light loads;
• Works effectively with wet or dirty ropes.

ITEM # 343053
PRODUCT NAME ROLL N LOCK, CT
PRODUCT WEIGHT 2.8 OZ (80 G)
ROPE SIZE 8-13 MM
COLOR ORANGE/GREY

From Climbing Technology, the improved Chest Ascender + (Plus) is a lightweight alloy chest ascender ideal for climbing ropes. Use together with the Quick Upascender handle. *Right-handed grip. Fits rope 10-13 mm rope sizes.

Specs

• External profile for the opening lever, which makes climbing up the rope smoother and more effective;
• Shape for the hole in the opening lever, to facilitate use even when wearing gloves;
• Lower hole design, so that the device always stays parallel to the user;
• Patented system for unlocking the cam, with just one downwards movement necessary;
• Steel cam, manufactured with technology that implements the resistance to wear and tear. Equipped with a set of teeth that protects the wear of the rope, but it is equally effective in blocking and ascending the rope. It also has three slots to prevent the accumulation of mud and reduce the effort needed to slide the device up the rope under any condition (muddy rope, frozen etc.)
• Anti-inversion cam system;
• Working load increased to 140 kg (on improved Chest Ascender + model).

Certified to:
EN 12841:2006/B Rope Adjustment Device.
EN 567:2013 Mountaineering Equipment, Rope Clamps.

Ascender Loop
This web loop is designed to be attached to a chest ascender and connected into a quick link to keep the ascender in an upright position. Sewn with a half twist for girth hitching to top of ascender.

From Climbing Technology comes a lightweight alloy ascender with ergonomic rubber handle, ideal for climbing ropes. Available in right- or left-handed grip. *Fits 10-13 mm rope sizes.

Specs

• New ergonomic grip, with support for index finger, for improved effectiveness when pulling during climbing;
• Cam opening lever is usable with one hand, andpatented system allows for unlocking with one downward movement;
• Camhas 3 cut-outs to prevent build-up of mud and reduce the force needed to slide the ascender up the rope.
• Two attachment holes for various possible uses, anti-inversion cam system, secondary hole for connecting a Maglia Rapide for an Etrier.
• Weight: 7.6 OZ (215 G)
• Rope Size: 10-13 MM

Certified to:
EN 12841:2006-B Rope Adjustment Device.
EN 567:2013 Mountaineering Equipment, Rope Clamps.

Self-braking descender for rope work, the evolution of the SPARROW 200 descender has been developed for high workloads. The improved 200R model features a redesign of the spring-operated braking spur that has been modified so that it orients toward the direction to which the rope is being paid into the device. The advantage of this modification provides even smoother control of decent speed as well as improved handling of the rope. It allows the operator to lower on the working line, to position on the working line and to ascend the same rope. It is ideal in the event of assisted lowering of two people with the device installed at the anchor (the operator lowers the rescuer and the person being rescued) or for simultaneous lowering of two people (rescuer lowers themselves with the injured person).

To be used only with static and semi static ropes – EN 1891 type A – Ø 11mm.

Field of application:

• Rescue descender certified to EN 341:2011-2A, work load limit 200 kg with a maximum descent height of 180 m, only to be used with the TEC STATIC PRO rope – Ø 11 mm;
• Rope adjustment/ descender device certified to EN 12841:2006-C, work load limit 210 kg, only to be used with EN 1891 type A – Ø 11 mm ropes.

Technical Features:

• Equipped with a breaking spur that creates additional friction on the rope, when used during the descent, without the use of an additional connector. The shape of the braking spur has been improved in order to have even more effective control of the rope;
• A multifunctional command lever with an automatic recall system that allows the operator to descend at a controlled speed and stop the descent at the desired point without the need to tie off the device;
• An EBS safety system (Extraordinary Braking System) that is activated if the lever is accidentally fully opened, reducing the speed of descent instead of increasing it;

Equipped with a safety lever on the movable flange that facilitates the insertion of the rope.

Ultra-light pulley / rope clamp (only 80 g!) designed for work, rope climbing maneuvers, rescue and self-rescue situations.

Specs

• Maximum holding strength with ability to self-equalize and distribute the load
• Able to be divided into multiple safety systems
• Increased holding power and minimal soil disturbance due to anchor rod
• Allows easy attachment of additional holding support if required
• Available as a Single StayK or as a Kit of three StayK

Ascender for the right or left foot, when used in conjunction with an ascender handle (e.g. QUICKUP) or a chest ascender (e.g. CHEST ASCENDER EVO), makes it easier and speeds up the ascent of a rope.

Specs

Light alloy right-hand chest ascender for climbing up ropes, to use together with the ascender handle QUICK UP.

Specs

• External profile for the opening lever, which makes climbing up the rope smoother and more effective
• Shape for the hole in the opening lever, to facilitate use even when wearing gloves
• Lower hole design, so that the device always stays parallel to the user
• Patented system for unlocking the cam, with just one downwards movement necessary
• New steel cam, manufactured with technology that implements the resistance to wear and tear. Equipped with a set of teeth that protects the wear of the rope, but it is equally effective in blocking and ascending the rope. It also has three slots to prevent the accumulation of mud and reduce the effort needed to slide the device up the rope under any condition (muddy rope, frozen etc.)
• Anti-inversion cam system

Multi-use light-alloy right-hand rope ascender for climbing ropes or as a clamp for hauling/rescue.

Specs

• Cam opening lever usable with one hand
• Patented system for unlocking the cam, with just one downwards movement necessary
• New steel cam, manufactured with technology that implements the resistance to wear and tear. Equipped with a set of teeth that protects the wear of the rope, but it is equally effective in blocking and ascending the rope. It also has three slots to prevent the accumulation of mud and reduce the effort needed to slide the device up the rope under any condition (muddy rope, frozen etc.)
• Two attachment holes for various possible uses, anti-inversion cam system.