Air Operations

A rope access workhorse thats as durable as it is comfortable.

The ATOM Series, our most comfortable harness line ever, is the culmination of stripping harness design down to the basics and re-imagining a performance-enhancing tool for rescue and rope access. CMC has incorporated years of feedback from experts who spend long hours in a harness. In addition, the ATOM harness went through rigorous field-testing, resulting in a harness design that improves safety, comfort and workflow efficiency in all the ways you cant see, but feel.

Every detail in the ATOM Access Harness has been thoughtfully designed for the rope access professional. From the structure and attachment points to buckles, gear and accessory loops and other features, the ATOM delivers maximum comfort, workflow efficiency and durability in a lightweight and low-profile harness system.

Specs

• Improved architecture molds to the user for a lightweight, low-profile fit.
• Ergonomic design for maximum comfort and support:
• Padding constructed from dual density foam, laminated to optimize load distribution and apply the right amount of support only where needed.
• Waist and leg pads are constructed with rolled edges to provide additional comfort.
• Y-back construction and bridged front lift:
• Allows for optimal adjustment at each shoulder.
• Provides a secure fit while minimizing pressure from the harness at the neck.
• Constructed with polyester webbing:
• Keeps a supple hand for comfort and easy buckle adjustment.
• Water repellent and UV resistant material for lasting strength and durability in extreme weather conditions.
• Multiple accessory attachment points provide ample space for stowing and organizing hardware and tools.
• Gear loop over-braid is based on a 32-carrier polyester, rope sheath design that delivers a familiar texture and functional robustness.
• UL Certified to relevant ANSI Z359.11, CSA and NFPA 1983 (2017 ED) standards.
• Made in the USA of domestic and foreign components.

Core Features

• Large ID aluminum D-rings at the waist, sternal and dorsal attachment points keep the harness lightweight, yet allows room for multiple carabiners.
• Steel adjuster buckles are low profile and allow for maximum and efficient adjustment.
• Aluminum side D-rings provide lightweight work positioning attachment points.
• Chest Ascender HC by Climbing Technology
• Hard coat anodization resists wear
• Unique integrated design centers unit for efficient rope ascent and enables replacement.
• Molded gear loops with high impact, cold resistant, polypropylene core provide easy gear stowage and retrieval.
• Four Tool Loops: Two at the rear waist and one at each leg pad for additional gear stowage.
• Workseat attachment points located at the waist to connect the CMC Skysaddle.

The ATOM Chest Harness provides exceptional comfort and versatility for high angle rescues. The ATOM Chest transforms the ATOM Sit Harness or Build Your Own (BYO) ATOM Sit Harness into a full body NFPA Class III Life Safety Harness. This modular unit is quickly and easily assembled for team members who transition from working on the edge to working on the rope. It allows rescuers to utilize the mobility of a sit harness until the comfort and versatility of a full body harness is desired. Use the ATOM Chest when the job calls for hanging on the rope, managing heavy loads, and operating complex rope systems. Compatible with CMC’s Chest Ascender Kit and built with multiple steel attachment points, the ATOM Chest delivers safety, comfort, and next-level versatility for the rope technician.

Features:

• Transforms ATOM Sit or Build Your Own (BYO) ATOM Sit into a NFPA Class III Life Safety Harness.
• Allows teams to utilize the mobility of a sit harness until a full body unit is preferred for working on rope.
• Sternal and dorsal steel D-rings provide robust, low-profile attachment points that can fit multiple carabiners.
• Integrated load transfer from chest attachment points to the Sit Harness, increasing comfort in a vertical lift.
• Compatible with a variety of chest ascenders that can be added or swapped using the ATOM Chest Ascender Kit.
• Built for all-day comfort and security, while being quick to install or remove to meet the demands of the job.
• Constructed using water-repellant, UV resistant webbing, as well as breathable D3 cloth in the dorsal padding.
• Available in black with contrasting thread for wear inspection and Black Web Keepers™ to secure loose ends.
• Replaces the ProSeries Chest Harness and adds another level of customization to the ATOM Harness Series.

Compatibility:

• The current ATOM Sit and BYO ATOM Sit (PN# 202B) has a rear oval ring for attaching the ATOM Chest. This combination creates an NFPA Class III Life Safety Harness without the need for additional hardware.
• The previous ATOM Sit (PN# 202A) has a soft loop on the back. A Trapezium Quick-Link is required to attach the rear tether of the ATOM Chest to the ATOM Sit. This combination is not NFPA Class III, but the ATOM Sit retains its NFPA Class II designation.

Assembly:

To combine the ATOM Chest with the ATOM Sit or BYO ATOM Sit, follow these steps and refer to the Pro Tip Video.

1) Remove the dorsal webbing from the slider buckle.

2) Feed the dorsal strap through the oval ring (202B) or Trapezium Quick-Link (202A) on the back of the ATOM Sit.

3) Re-attach the dorsal strap to the slider buckle of the ATOM Chest.

4) Feed the trap link through the center loop on the ATOM sit. Make sure it feeds through all of the webbing layers.

5) Tighten the trap link using a 15mm wrench.

Ascenders:

To install or swap out a variety of chest ascenders, follow these steps and refer to the Pro Tip Video.

1) Open the trap link on the ATOM Chest and remove the front lift.

2) Run the chest ascender strap loop over the front lift of the ATOM Chest.

3) Push the stiffened end of the chest ascender strap through the top hole of the chest ascender and over the back of the front lift.

4) Push the stiffened end under the top strap, over and back under the bottom strap, and under the chest ascender strap loop itself.

5) Reconnect the front lift to the trap link and tighten with a 15mm wrench.

6) Use the delta link to connect the chest ascender to the atom Sit ventral webbing attachment point.

7) Confirm the delta link is positioned in front of the ATOM Chest trap link, running through the same webbing loops.

8) Tighten the delta link with a 14mm wrench. Both the delta and trap link should be secured a quarter turn beyond hand tightness.

Because there is a need for a quick extrication device when spinal immobilization is not a priority, the CMC/SKEDCO Drag-N-Lift Harness was developed and engineered as a means to rapidly package and extracta patient from a confined space.The device enables the rescuer to provide a fast load-and-go technique that allows the patient to be packaged efficiently and securely for a vertical lift, horizontal carry out or drag extraction. Compact storage, ease of use, and flexibility in transport have made Sked stretchers popular worldwide. The drag sheet is constructed from heavy-duty E-Z glide plastic that becomes rigid when curved around the patient. A variety of handles and straps allow the patientto be transported by carrying horizontally, lifting vertically from a rope system, or pulled with the harnesssliding on its smooth bottom surface. In the event that spinal immobilization is needed, the device is compatible with the SkedcoOregon Spine Splint (OSS II) and cervical collar.

Specs

• Designed for quick and secure vertical lift, and horizontal drag or carry extrication
• Vertical lift attachment points designed for use with a lifting bridle/spreader bar
• Compatible with OSS II and other spinal immobilization devices
• Replaceable Skedco E-Z glide plastic drag sheet protects patient and harness
• Integrated harness assembly restrains the patient securely
• Padded back section and leg loops provide patient comfort
• Color-coded straps and quick-connect fasteners expedite patient packaging
• Handles on sides, top and bottom allow for easy positioning and moving the patient
• AustriAlpin Cobra buckles are secure and simple to adjust
• Corrosion-resistant hardware
• X-ray translucent
• Cleans easily
• Includes heavy duty water-resistant Cordura nylon storage bag
• UL Classified to NFPA 1983 (2017) - Class III Victim Extrication Device
• Made in USA of domestic and foreign components

Spreader bar is recommended for proper use of the Drag-N-Lift harness. Purchase of the kit includes both the Drag-N-Lift harness and spreader bar.

Spinal Immobilization Protocol

There has been a recent trend in the increasing number of EMS agencies that support a progressive, evidence-based approach in an effort to lessen unnecessary spinal immobilizations in the field. Its appropriate for emergency personnel to immobilize certain trauma patients, however many other trauma patients are unnecessarily immobilized. Spinal immobilization isnt always a benign intervention as it can result in increased scene time, delay of delivery to definitive care, problematic airway management, increased patient pain and discomfort, and unnecessary radiographic testing. Many trauma patients can be safely and accurately assessed and treated without spinal immobilization if they meet all criteria in pre-hospital spinal assessment guidelines. Extensive training and ongoing review is necessary for an effective selective immobilization protocol. Always refer to your specific medical directive for spinal immobilization procedure.

Designed for Emergency Rappel

In a class by itself, CMC offers the only NFPA Certified Uniform Rappel Belt available. Designed for everyday wear but with the performance needed for an emergency rappel or belay. Standard uniform wear for fire fighters, search and rescue, and SWAT personnel, the belt is constructed to the same exacting standards as our harness line and is the only certified uniform belt available. The belt uses 1-3/4 web that fastens securely without requiring any hook-and-loop material. The AustriAlpin D-ring COBRA buckle is manufactured from 7075aluminum alloy and features a built-in stainless steel D-ring (Buckle:18 kN / 4,000 lbf MBS, D-ring: 22 kN / 5,000 lbf MBS, straight pull). The buckle requires a two finger release and will not open when loaded. Included web keeper secures excess web at tail end of belt. Adjustable, one size fits most.

Note: This belt is not intended as a substitute for a harness.

Specs

A medium-duty, economical litter designed for durability and versatility, featuring unique tubular runner rails that span the full length of the litter along the bottom. These provide a very strong, durable base, making it far more difficult to damage during regular use compared to other baskets that simply use a flat bar. A very cost-effective alternative to the more heavy-duty stainless steel models, this powder-coated steel litter with Durathene netting meets the needs of many users who only use litters occasionally, or who are on very limited budgets for rescue equipment. Our Disaster Response Litter comes in black with four litter straps. The narrower, confined space model fits through tight openings.

Shipping Charges on Litters and Litter Wheels: This item is drop-shipped direct from the manufacturers warehouse. A $125 USD flat rate shipping fee applies per item shipped within the contiguous US. Please allow up to 4 weeks for delivery.

Made of 1-inch (25-mm) mil-spec tubular web and designed specifically for rescue, this etrier is superior for litter tending and other vertical activities. The four steps are stiffened for easier foot entry and abrasion protection. The top hand grip aids balance when moving up or down a tender line. The Etrier with Tie-In has a 3-foot (91-cm) multi-loop strap which can be attached to a harness as a safety backup.

CMC sewn web products reflect many years of manufacturing experience and designs based on field use, rescues and testing. Lightweight yet durable, our tubular web delivers a high strength-to-weight ratio. Each product is sewn in our own California manufacturing facility with contrasting color thread for ease of inspection. We build CMC Web Gear as if we were going to use it ourselves - and we do.

The Fastest Connecting Anchor Strap Solution Available!

Standard anchor straps with D-rings on each end can create tri-axial loading on the connecting carabiner. A delta screw link connecting the two ends of the strap eliminates this hazard, but screw links are slow to fasten and add weight. Weve eliminated the D-rings and solved both problems with this new design. Simply wrap the strap around the anchor point and clip the integrated ProTech Auto-Lock Carabiner into the included 12 mm Delta Quick Link, and youre ready to connect your system.

Specs

Strength Specifications for All Sizes:
Basket (U) Configuration: 45kN (10,116 lbf)
End-to-End Configuration: 25 kN (5,620lbf)
Choker Configuration: Not Applicable

Designed for aircrews by aircrews, the full-body Helitack Harness brings operator comfort, safety and versatility to a new level. The sewn waist loop attachment point allows for multiple carabiner attachment as well as large hoist hooks without the risk of twisting or binding hardware. A rear D-ring provides a travel restraint attachment point when working inside the aircraft cabin. Sternal and dorsal attachment points provide additional hoisting/lifting points in order to facilitate specific mission requirements.

The vest is made of high-visibility orange mesh and features reflective material on the back of each shoulder, allowing the wearer to be seen more easily in low light conditions, as well as aiding vertical referencing when suspended beneath the aircraft. Sewn web loops on the shoulders permit the attachment of a strobe light, knife or other accessories. Features Dual-Radio pockets for two hand-held radios or to store gloves, chemical light sticks or other adjuncts.

The front features a built-in MOLLE Attachment System. Two 10-mm Delta Quick Links included.

A Radio/HEED version that features a single radio pocket as well as a pocket for an emergency egress air bottle (not included), which is often desired when flying over water, is available by special order. A flotation collar may be added by special order.

Specs

A great way to store and protect your helmet, headlamp, goggles and gloves by keeping them together yet separated from other equipment, this roomy bag is the one we use to store our Victim’s Gear Kit. There’s also enough room for a Lifesaver Victim Harness and Pick-Off Strap. When the strap and harness are attached to the system, the rescuer can leave the victim’s gear in the Helmet Bag and clip it onto his harness. (Helmet not included.)

Specs

A Tagline is essential for controlling oscillation and other litter movement during hoist operations. The Tagline set includes 100 ft (30.5 m) of 5/16-in (8-mm) cord in a bag designed to be secured to a litter rail so it will be there when you need it. A weak link (expected breaking strength 150-175 lb [68-79 kg]) is included, as well as a Quick Link to accommodate the connection between the cord and the weak link.

Specs

Ironclads most popular glove. A long-wearing, tough all-around utility glove with amazing tactile feel and dexterity. Features synthetic leather palm and finger sidewalls with TPR knuckle protection. Duraclad reinforcements provide maximum durability. TPR Cuff Puller gets your glove in the proper position faster. Hybrid Cuff System features secure fit with built in quick release safety feature. Built in terry cloth sweat wipe conveniently located on the back of the thumb. Great for all-around station work, construction, trench work, cable work, and material handling.

Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. The IronClad Heavy Utility Gloves can be used with confidence to provide hand protection in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards they fall under. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

The K9 Lifesaver Harness was originally developed for the San Francisco Fire Department to use for rescuing stranded dogs from coastal cliffs. The department consulted with a veterinarian to help ensure that the harness properly supported the weight of a dog without harming its internal organs or tail while being suspended. Integrated features range from head to tail to provide the rescuer the means to quickly and safely secure a K9 for a pick-off rescue or extraction from confined space. The harness lift assembly distributes weight evenly to reduce pressure points, and five quick-connect buckles make securing and adjusting to the dog’s body fast and intuitive. D-ring located at chest for low-angle evacuations. Padded back and belly assembly provide safety and comfort while keeping straps separated to expedite the donning process. Compatible with most medium sized dogs.

Specs

Designed to be a quick-donning, lightweight harness that the handler can pack into the field, the K9 ProSeries Rappel Harness features rugged Cordura^® nylon panels on the outside and breathable D3 cloth on the inside. Designed to not open when loaded, the harness features (5) ANSI-rated aluminum Cobra buckles that are extremely quick to connect and disconnect. Two-inch web straps securely support your dog during rappels and hoists. A large molded rubber handgrip makes it easy to lift, position and control your dog during the evolution. A stowaway rear-lift assembly fits around the dog’s rear legs for additional security. The soft loop main connection point suspends the dog in a comfortable position. Features a rear attachment for lead connection and elastic loops to secure a light stick. Extensively tested, proven and trusted worldwide by K9 teams for comfort, security and ease of use. One size will fit most rescue/tactical-use canines.

Specs

Designed to be a lightweight, portable harness that the handler can pack into the field, the K9 Rappel Harness features rugged Cordura^® nylon panels on the outside and breathable D3 cloth on the inside. Two-inch web straps securely support your dog during rappels and hoists. A large molded rubber handgrip makes it easy to lift, position and control your dog during the evolution. A stowaway rear-lift assembly fits around the dog’s rear legs for additional security. The soft loop main connection point suspends the dog in a comfortable position. Features a rear attachment for lead connection and elastic loops to secure a light stick. Extensively tested, proven and trusted worldwide by K9 teams for comfort, security and ease of use. One size will fit most rescue dogs.

Specs

An Evolution in Rescue and Rope Access Head Protection
ANSI Z89.1-2014/ CSA Z94.1-15

The Kask SuperPlasma HD helmets have been specifically designed for professional rescue and work-at-height applications provide the ultimate in head protection! They are lightweight, compact, amazingly comfortable and well-ventilated with 10 air intakes, equipped with protective aluminum anti-intrusion grills to deflect debris and water. Soft polyethylene side retractors regulate length of the straps, with a special red-colored ring on one for fastening the helmet to a harness.Works perfectly with the CMC Sunbrero!

Specs

• Headlamp clips are compatible with all headlights with elastic bands
• 4 point chinstrap constructed from eco-leather that is anallergic and washable, and uses quick-release fasteners
• Antibacterial treatment prevents bacterial proliferation in padding
• Fast 3Dry fabric dries quickly and disperses moisture to the outside
• Front pad absorbs moisture for breathability and is easily removable for washing
• Innovative and exclusive UP & Down 2.0 technology ensures precise and comfortable fit around the back of the head. Center wheel and the two side wings allow quick adjustment in suspension width, height and tilt
• Attachment loop on chinstrap provided for clipping the helmet to a harness
• Integrated attachment system for the KASK accessories: Visor, face shield, earmuffs, other

Construction: External Shell: ABS; Internal Shell; HD Polystyrene
PPE Category: Type I Class C
Certifications: ANSI Z89.1-2014 - Industrial Head Protection: Type I, Class C and CSA Z94.1-15
Universal Size: Adjustable from 51-62 cm (20-24.5 in) -6-3/8 7-3/4

Optional SuperPlasma Visors and face Shields are available in several styles for added eye and face protection

Made in Italy

SuperPlasma Hi-Viz version features fluorescent colors and features reflective decals as well as glow-in-the-dark headlamp clips for maximum visibility in dark conditions.

An Evolution in Rescue and Rope Access Head Protection
ANSI Z89.1-2014/ CSA Z94.1-15

KASK SuperPlasma HD Helmet Visor 

Specs

The Lifesaver Victim Chest Harness turns the Lifesaver Victim Harness into a full-body evacuation harness for vertical lifts during confined space operations or wherever upper body support is needed. It’s easy to attach to the patient under all conditions, and its padding provides added comfort. Pelvic harness and carabiner sold separately.

Specs